User`s guide

WN-5220-S VideoWall User’s Guide
33
necessary for most applications, but can be used to eliminate some
types of video noise.
1. Press the remote
control PHASE
button
The PHASE adjustment menu is displayed.
2. Press the
Left/Right arrow
keys
Adjust to produce the best image quality. For computer
applications, use the same large area checkerboard as for
the FREQ adjustment. Incorrect Phase will show up as
horizontal streaks of random noise. This shows most
clearly with Sharpness ON.
3. Press PREV
MENU
Exit the PHASE menu.
Set the Sharpness
Source Select
Frequency
Phase
Input Level
Position
Zoom
Color Balance
Curtain
Hours
Save Config
Recall Config
Reset Config
Misc Control
About
Misc Control
[X] Sharpness
[X] 16M Colors
[X] Buzzer Enable
[ ] Flip Horz
[ ] Flip Vert
[ ] Auto Lamp On
[ ] Test Patterns