User guide

35
changes the incoming video to the display’s fixed
refresh rate.
• Be sure you the EDID for DVI/Analog settings is
correct. Some video cards with both analog and
digital outputs use only one of them, the one cor-
responding to what the card read in the EDID.
The other output from the card will have nothing.
• Uncheck the Plug and Play box and reboot the
computer.
• If you must use a video resolution that is not dis-
played in the Settings > Control Panel > Display
> Settings tab, and that resolution is listed in
“Tables of Modes for Analog Inputs” on page 94,
try unchecking the Plug and Play box. If that does
not help, you may have to contact the manufac-
turer of the video card for help.