User manual

RetCam Shuttle User Manual and Service Instructions PN 20-000238 Rev. B
Maintenance and Support 61
Remove the blown fuse from the fuse holder and replace it with a new fuse of same
type and rating. (See Figure 47.) Reinsert the fuse holder.
Figure 47 Blown fuse removed
CAUTION: For continued protection against risk of fire, replace only with same type
and rating fuse.
Replacement fuses are available from Clarity Customer Service.
Replace Illumination Lamp/Bulb
WARNING: Appropriately shutdown and unplug the unit to allow the bulb to cool
before replacing it.
Note: Replacement bulbs are available from Clarity Service.
1. If not already OFF, turn OFF the Main Power (see page 23).
2. Disconnect the power cord from the wall.
3. Unplug the fiber optic cable from the front panel.