User manual

60 Maintenance and Support
RetCam Shuttle User Manual and Service Instructions PN 20-000238 Rev. B
Fuse Replacement
Locate the power entry module on the lower right side of the rear of the cart. Make
sure to remove the power cord before proceeding any further. (See Figure 44.)
Figure 44 Power Entry Module
Using a flat blade screwdriver, gently pry open the cover of the fuse holder at the top
of the power entry module. (See Figure 45.)
Figure 45 Opening the fuse holder cover
Remove the fuse holder. (See Figure 46.)
Figure 46 Removing the fuse holder
Cover open Gently pry at edges to start removal Finish removal with fingers