User manual

RetCam Shuttle User Manual and Service Instructions PN 20-000238 Rev. B
Using the RetCam System 33
Changing Image Capture Options During an Exam
Before you start imaging, verify that the options displayed for eye, image type and
lens piece are correct. If necessary, you can edit options from the image capture
screen.
Figure 19 Select options for image capture
Changing: Right Eye (OD) / Left Eye (OS)
To image the other eye in the same session, expand the Eye menu and select
the other eye (Right Eye (OD) or Left Eye (OS)). The Eye selection is saved with
the image.
+
Note: When using this option, be careful that you select the correct eye before
you save the image. This is especially important when both eyes are captured
in one video clip, and you save still images from the video. Make sure you
select the correct eye before you save each still image from the video.
+
Note: Images and video can be selected for deletion only during the imaging
session. Once the session has been exited, the images will be saved for that
session.
Changing Lens
You can also select a different lens piece during imaging. Expand the Lens menu
to select 1300 (Premature Infant), 1200 (Standard Baby), 800 (Posterior), 300
(High Mag), or Unspecified. The lens piece selection is saved with the image.
Changing Image Type
Expand the Image Type menu to select Retina, Anterior Segment, or
Unspecified during an imaging session. All selections record the images in color.
The Image type selection is saved with the image.
Enable mouse-over image preview: When hovering over thumbnail images, a
larger image will appear. By default, this feature is selected on and may be turned
off.
Figure 20 Enable mouse-over