User manual

30 Using the RetCam System
RetCam Shuttle User Manual and Service Instructions PN 20-000238 Rev. B
Figure 15 Still image screen
1. Set the Footswitch Operation to Save Snapshot (default).
2. Adjust the focus and light intensity using the footswitch.
3. Depress the green SNAP button to capture a still image. You can also capture
an image using the "S" key on the Notebook keyboard or by selecting the
button.
4. The saved image appears in your thumbnail display (if the "show thumbnails"
option is enabled).
Capturing Video
1. Set the Footswitch Operation to Video Recording.
2. Adjust the Focus and Light Intensity using the footswitch.
3. Depress the green SNAP button to Start and Pause video recording. The
progress bar will display the amount of video recorded. You can also depress
the spacebar on the Notebook computer to Start and Pause Recording.
+
Note: You can capture still images by depressing the button during
video recording.
4. Select the Stop Recording button to STOP recording video.