User guide

74
Diagnostics: Display Status
Press MONITOR once to open the
display Status menu.
The Display Status menu shows the status of the
lamp and fan. 573- is the firmware number. For
Bengal it will be 5732200
Fan: On when running. When a fan fails, the lamp
will not turn on and you can’t see this menu.
Lamp:On when the lamp fails you can’t see this
menu.
Mode ID: Each mode has a number, and this is the
number of the one used now. For XGA, for instance,
there are several, each with a different vertical fre-
quency, number of active lines, total number of lines.
Last Fault: Shows the last event that caused the lamp
to go off and the elapsed system time (not clock time)
in hours:minutes since that happened. Time is in 5
minute increments and does not update while the
menu is open.