User guide

69
Memory: Save
In the Save grid, use the arrow keys to cycle through the
available memories. As you navigate through all 40
memories, Save Now will show (Overwrite), as shown
here.
For each empty memory, the Name of the memory is the
default name for this slot. You can change this name as
described at the below. Many lines are grayed out
because you can’t change anything here except the
name of the memory. The lines in this menu are differ-
ent for saving different modes: video or digital.
(Overwrite) appears if the Save to Slot number currently
has something saved in it.
To save, highlight Save Now and press
ENTER.
A (Current) notice will appear in Save to Slot to indicate
that the save was successful and that the slot now con-
tains exactly what the Bengal is doing now.
To ch a n g e t h e Name of a memory slot, highlight Name
and press
ENTER. A bar appears below the name which
indicates character position. Use the +/– arrows to
move the yellow highlight in this bar. Use the up-down
arrows to change the character at that position. There
are 24 character spaces available.
The default name is an abbreviation of the memory con-
tents: connector used, resolution.
ENTER
Press SAVE twice to
open this menu
directly.