User guide

50
4.3 Controlling Bengal with Remote
You can control Bengal with the remote control or with RS232 commands.
Remote control
The remote control projects a series of IR (infra-
red) pulses to the Bengal for control. Aim the remote
control at the screen and press
MENU. The main menu
should be visible, if the lamp is on.
For a complete list of all remote actions, see
6.1 “Remote Control Functions” on page 62.
If the remote doesn’t work
• The batteries in the remote are dead or installed
wrong.
• The remote was not aimed at the screen.
• Something is blocking the IR receiver in the Ben-
gal.
 The remote control has a large spread of its IR
radiation. If you find you are having a difficult time
controlling the
Bengal, move closer and aim the remote
at the lower left corner of the display.