User guide

2.2 Unpacking the Bengal

To avoid damaging the Bengal during unpacking, it is advisable to read this section carefully.

1. Remove the plastic plugs on either

side of the bottom of the box.

2. Open the box top and find the accessories

inside. Remove the accessories and the car-

board accessory holder. You may want to

install the wall mounting bracket, from the

accessory kit , on a wall or optional stand

before unpacking the rest of the way. This

would provide a safe place for the

Bengal

3. Remove the three foam pieces

from the top of the

Bengal.

4. Slide the box sleeve up and off of the

Bengal

5. Lift the Bengal out of the box

and remove the plastic.

Be sure that you have a safe

place to stand the unit up. It

cannot be placed on its back or

on its face.