Product Manual

Note: Specimens may be assigned the same test number. They will be

distinguished by test date and time in the Database.

Continuous Test

Select Continuous Test and press ENTER to cycle the settings to Off or On. When the

selection is correct, select EXIT and press ENTER to return to the Main Menu.

Continuous Test – Off (Single Test Mode)

Test one strip at a time. Single Test Mode performs 60 tests / hour.

Continuous Test - On

Test strips one after another. Continuous Test Mode performs up to 120 tests per hour.

When Continuous Test is on, the

symbol will be displayed.

Operator ID

Select Operator ID and press ENTER to increase the number by one. After 10, it

reverts back to 01. If User Login is enabled and Operator ID is 11 through 20, this

setting cannot be changed. Select EXIT and press ENTER to return to the Main Menu.

Units

Select Units and press ENTER to cycle the units between Conventional or SI units. If

User Login is enabled and Operator ID is 11 through 20, this setting cannot be

changed. Select EXIT and press ENTER to return to the Main Menu.

Note: Arbitrary results will always be printed.

Analyzer Configuration

Select Analyzer Configuration from the Main Menu to display the screen below.

Press ▲ or ▼ to move → to make changes. After all changes are made, select EXIT

and press ENTER to save changes and return to the Main Menu. If User Login is

enabled and Operator ID is 11 through 20, this Menu cannot be changed.

Printer Setup

Select Printer Setup to display the screen below.