Product Manual

Note: Ensure the type of strip selected corresponds with the strip to be

used. If it does not, an error message will be displayed.

Mode

There are three test mode options. Press ENTER when Mode is selected to change the

Mode.

Note: The Mode can be changed during normal testing for STAT tests.

Routine Test

Use for normal urine testing. The default test number ranges from 1 to 99999. It resets

to 1 every day automatically if Auto Number Reset is set to Yes.

STAT Test

Use for emergency urine testing. The default test number is from 100001 to 199999. It

resets to 100001 each day automatically if Auto Number Reset is set to Yes. The

analyzer will automatically switch to STAT test and can not be changed if the QC test

has failed.

QC Test

Use to test positive/negative controls. If QC lockout is on, this test will be run

automatically. The test number ranges from 200001 to 299999. It resets to 200001

every day automatically if Auto Number Reset is Yes.

Note: Ensure QC Test mode is used for testing positive and negative

controls. Use of any other mode will report the testing results as a

regular specimen and will not display proper “Pass/Fail” QC test

results.

Test Number

Select Test Number and press ENTER.

Enter the new Test Number. Press ENTER to confirm. Press CANCEL to delete any

changes and keep the existing number.

The first digit in the number will depend on the Test Mode. The first digit will be 0 for

Routine, 1 for STAT and 2 for QC Test. This first digit is fixed and cannot be changed

from this screen. Tests run after this number is changed will be set sequentially from the

new number.