Product Manual

15
Press CANCEL to keep the existing passcode and exit.
Scan or enter a valid Passcode and press ENTER to accept and exit. User Login will
be enabled.
Operator Setup
After User Login is enabled, select Operator Setup and press ENTER.
X indicates the ID is enabled. O indicates the ID is not enabled
Press ◄ or ► to move the cursor to the desired ID. Press ENTER for the Passcode
screen.
Scan or enter a new Passcode. Press ENTER to save the settings and exit. Press
CANCEL to cancel the settings and exit. Enter a blank Passcode to disable the ID.
Logout
After the User Login is enabled, select Logout and press ENTER to log out. The
normal Login screen will be shown for a new operator login. See Section 5 for Login
procedures.