Product Manual

14
On entry to this screen for the first time, leave the Passcode blank and press ENTER.
Press CANCEL to return to the Initial Screen without enabling User Login.
ID Admin
The Administrator screen is shown.
Press ▲ or ▼ to move the → to make changes. If Passcode is blank, user login is not
yet enabled and only Change Admin Passcode can be chosen. Select Exit and press
ENTER to save changes.
Change Admin Passcode
Change the passcode from blank to a valid passcode, select Change Admin
Passcode and press ENTER.
Press ENTER to accept
CANCEL to exit
Old Passcode:
New Passcode:
Change Admin Passcode
A non-blank passcode must be entered to enable User Login. If a blank is entered, a
new screen will indicate the passcode is invalid. After 3 seconds, the screen will return
to the login screen.