Product Manual

13
to save the changes and exit the screen. Press CANCEL to not accept changes and
exit.
There is no Date Setup if QC tests are set for Every 8 Hours or Daily.
For the Monthly option, Date can be set from 01 to 28. 29, 30
and 31 are invalid.
Run QC Test
Select Run QC Test and press ENTER to perform a QC test before the next scheduled
test time.
When a QC test is run for the first time, the analyzer will show the screen below if QC
values have not been set up.
Setting the QC Values
From the Initial Screen, enter the passcode 810018 to show the QC value setup
screen.
Press ▲ or ▼ to change the highlighted digit. Press ◄ or ► to move to the digit to be
changed. Press ▲ or ▼ to increase or decrease the value. Change each of the analyte
QC values in this manner until the desired values are shown. Press ENTER to save the
changes and exit the screen. Press PRINT to print the current values.
Note: Please set up the QC values, according to the urine control
expected values insert. The QC set-up screen recognizes only
arbitrary values.
User Login
Press ENTER from the Initial Screen to show the Administrator login screen. The
Operator ID is preset to 100.