Product Manual

11
Press CANCEL to return to the previous screen. Additional records can be located,
reviewed or printed.
View Current Record
Select Current Record and press ENTER to show the data from the current or last
record.
Press Print to print a record once it is displayed.
Press ▼ to view the previous record. Press ▲ to view the next record.
Press CANCEL to return to the previous screen.
Self Test
Select Self-Test and press ENTER to perform self-tests. A results screen will display
the results of each test.
After each test, a pass or fail is displayed on the screen. If any results fail, the unit will
not operate. Refer to Section 10 Troubleshooting.
Press CANCEL to return to the Main Menu.
QC Test
Select QC Test and press ENTER. If User Login is enabled and Operator ID is 11
through 20 the operator can only view settings and run a QC test.
Press ▲ or ▼ to move → to make changes. Select Exit and press ENTER to save
changes.
QC Setup
Select QC Setup and press Enter.