Product Manual

Time Format

Select Time Format and press ENTER to cycle to 24 Hour or 12 Hour. 12 Hour

displays the time with am/pm symbols.

Set Date and Time

Select Set Date and Time and press ENTER to display a new screen for setting the

current date and time.

The first digit to be changed in the date will be highlighted. Press ▲ or ▼ to change the

number one at a time. Continue to press ▲ or ▼ until the correct number is shown.

Press ◄ or ► to progress to the next digit to be changed. Press ▲ or ▼ to increase or

decrease the number. Change each of the time and date digits/fields in this manner.

Press ENTER to save the changes and exit the screen. Press CANCEL to not accept

any changes and exit the screen. Either key will return to the previous screen.

Auto Number Reset

Select Auto Number Reset and press Enter to cycle to Yes or No. If Yes, the test

number will reset to 000001, 100001 or 200001 for Routine, STAT or QC modes each

day. If No the test number is unaffected by date.

Database

Select Database and press ENTER to display the screen below.

Press ▲ or ▼ to move → to enter each screen and make changes. After all changes

are made press ENTER to save changes and return to the Main Menu.

Up to 2000 records can be stored in memory. If User Login is enabled and Operator

ID is 11 through 20, the operator can only review data stored in the analyzer.