Administrator’s Guide (Mac OS)

Installing FileMaker Pro Server 1-3
See the documentation that came with your operating system and network
software for more information.
Before you begin
Before you begin the installation process, make a backup copy and register
your new software.
Make a backup copy
To protect your software, lock your FileMaker Pro Server disk and make a
backup copy of the disk before you start the installation procedure. If you
need information on locking and copying disks, see the documentation that
came with your computer.
After you make a backup copy, store the original disk in a safe place. Lock
the copy and use it for installation and everyday work.
Important When you name the backup disk, give the blank disk the same
name as the disk you’re copying, for example, Disk 1. The Installer won’t
recognize the disk if its name is different from the original. Be sure you
haven’t created an extra folder named Disk 1 on the backup disk. (This
happens when you drag the disk image onto the backup disk to make the
copy.) If you have a folder named Disk 1 on your backup disk, drag
everything out of this folder onto the disk’s window and then throw away the
empty Disk 1 folder.
Register with Claris
Take a minute to complete and mail the postage-paid product registration
card for your new software, or call [phone] to register by phone.
Keep the part of the card with your serial number on it in a safe place.
For information about customer support, see the Claris Service Directory
included in the product package.
TCP/IP Apple MacTCP
®
2.0.6 (or later) or
Open Transport 1.0.8 or later (version
1.1 is included in the FileMaker Pro
Server 3.0 package)
Microsoft TCP/IP-32
Network
protocol Mac OS platform Windows platform