Administrator’s Guide (Mac OS)

Installing FileMaker Pro Server 1-7
The dialog box lists the files you can install.
3. Click the checkboxes to select (or deselect) components for installation.
Click the information button next to the selected component to see more
information about the feature.
Note The use of MacIPX networking with FileMaker Pro Server is
optional. If your network only needs to support guests using AppleTalk or
TCP/IP, deselect the MacIPX components before clicking Install.
4. To install the application onto a different disk or into a different folder
from the one shown, click Select Folder.
In the dialog box that appears, use the Select button to choose a destination
disk and folder. If you switch to a disk that isn’t a hard disk or is locked,
the
Select button is dimmed.
5. Click Install.
If the selected disk doesn’t have enough space, you see a message, and the
installation is halted.
If the selected disk has enough space, the Installer begins copying files. A
dialog box tells you what the Installer is doing. After all the files are
installed, a final dialog box tells you the installation on your hard disk was
successful. If you install the Thread Manager or MacIPX software, you
must restart your computer to use the new software.
6. Click Quit or Restart to leave the Installer and restart your computer,
if necessary.
7. If you turned off virus protection and file sharing before installing, turn
them back on.
See “Starting FileMaker Pro Server” on page 1-8 for information on
starting the application.
Click to select Custom Install
Click to select
components to install
Click to see more
information about
the component