Administrator’s Guide (Mac OS)

1-6 FileMaker Pro Server Administrator’s Guide
5. Leave Easy Install selected.
For information about Custom Install or Custom Remove, see “Custom
installation” on page 1-7 and “Removing the software” on page 1-12.
6. To install the application onto a different disk or into a different folder
from the one shown, click
Select Folder.
In the dialog box that appears, use the Select button to choose a destination
disk and folder. If you switch to a disk that isn’t a hard disk or is locked,
the Select button is dimmed.
7. Click Install.
If the selected drive doesn’t have enough space, you see a message, and
the installation is halted.
If the selected disk has enough space, the Installer begins copying files. A
dialog box tells you what the Installer is doing. After all the files are
installed, a final dialog box tells you the installation was successful.
Because the installation places new software in your System Folder, you
must restart your computer to use the new software.
8. Click Restart to leave the Installer and restart your computer.
9. If you turned off virus protection and file sharing before installing,
remember to turn them back on now.
See “Starting FileMaker Pro Server” on page 1-8 for information on
starting the application.
Custom installation
To install a subset of the FileMaker Pro Server files:
1. Follow steps 1 through 4 in the previous section.
2. Choose Custom Install from the pop-up menu in the top-left corner of the
Install dialog box.