Administrator’s Guide

Using the Web Server Connector as host 37
8. Click the Submit button to send your information to the Web
Server Connector.
You see the message Host Updated. This confirms that your changes
were made.
9. Repeat steps 3 through 8 for each host.
Removing a host from the Web Server Connector
1. In the Web Server Connector, click Configure by Host.
2. Select the Remove checkbox to the left of each host you want to
remove.
3. Click the Remove Host(s) button.
Adding a database to the Web Server
Connector
Configuring by database provides a useful interface for bringing
databases into or out of a RAIC.
When you configure by database, you see a list of all databases
currently hosted by the Web Server Connector. This feature allows
you to see at a glance the number of hosts shared by individual
databases.
1. If you are already logged on to the Web Server Connector, go to
step 5.
2. Prepare your databases for sharing via the FileMaker Pro Web
Companion, as described in “Configuring the FileMaker Pro Web
Companion” on page 33.
3. Open the Web Server Connector, as described on page 35.
4. Enter the administrator user name and password at the prompt.
5. From the first page of the Web Server Connector, or from the top
of any subsequent page, click the Configure by Database link.
Enable all
appropriate
checkboxes
Click to go to the
Configure by
Database page