Installation and New Features Guide (Windows)

1-20 FileMaker Pro Installation and New Features Guide
Changing the frame type in Windows 95
If you are using TCP/IP networking, you do not need to change the
frame type. To change the frame type with IPX/SPX networking:
1. Open the Network control panel and click the Configuration tab.
2. Open IPX/SPX Compatible Protocol and click Properties.
3. Click the Advanced tab.
4. Click the frame type in the Property dialog box.
5. Make a selection from the Value drop-down list.
6. Click OK.
Windows 95 prompts you to restart your computer for these new
changes to take effect.
Changing the frame type in Windows NT
If you are using TCP/IP networking, you do not need to change the
frame type. To change the frame type with IPX/SPX networking:
1. Right-click Network Neighborhood.
2. Select Properties from the menu.
You see the Network dialog box.
3. Click the Protocols tab.
4. Click NWLink IPX/SPX.
5. Click Properties.
6. Select a frame type from the drop-down list.
7. Click OK to apply the frame type.
8. Click OK to close the Network dialog box.
Windows NT prompts you to restart your computer for these new
changes to take effect.
Changing the frame type in Windows 3.1 and Windows for Workgroups
For information on changing the frame type in Windows 3.1 and
Windows for Workgroups, please refer to the documentation that came
with your networking software.