Installation and New Features Guide (Windows)

Installing FileMaker Pro in the Mac OS 3-3
You see the Personalize dialog box.
4. In the Name box, type your name and press the Tab key.
5. Type your company name, if applicable, and press Tab.
If you don’t have a company name, you can put other information
(like your address) in the box or leave it blank.
6. Type your FileMaker Pro installation code.
The installation code is a seventeen-digit number located on either a
two-part sticker attached to the front of the paper CD envelope cover
(North America) or a three-part sticker attached to a separate paper
sheet within the box (International).
Important You must enter the installation code during installation or
the software will not install. See “Installation code” on page 1-2 for
more information.
Check your typing carefully. After you click OK, you can’t change the
name, company, or installation code unless you re-install
FileMaker Pro.
7. Click OK.
The Installer begins copying files. After all the files are installed, a
final dialog box tells you the installation on your hard disk was
successful.
Type your name here
Type your Iistallation code here