Installation and New Features Guide (Windows)

2-14 FileMaker Pro Installation and New Features Guide
3. Choose a network protocol from the Network Protocol drop-down list.
Note In Windows 3.1, FMIPX32.NET and FMTCP32.NET appear in the
drop-down list.
Changes to this setting don’t take effect until you exit FileMaker Pro and
then start it again.
IPX/SPX Considerations
Windows 98, Windows 95 or Windows NT To allow the maximum number
of guests (25), your IPX/SPX connections must be set to 60 or greater.
Consider increasing the SPX connections to 60 in the Network control
panel if you cannot connect the desired number of guests. You do not
need to modify settings in Windows NT.
Windows 3.1 or Windows for Workgroups 3.11 You should use the Novell
NetWare Client Shell version 3.26 or later to share FileMaker Pro files.
You’ll need to change Novell NetWare settings in order to network
FileMaker Pro. To share FileMaker Pro files over the network, your
machine must be a fully configured NetWare client.