Developer’s Guide (Mac OS)

Distributing your bundled solution 5-7
Installing your solution
You’ll need to provide installation instructions to your end-users. Keep
the following in mind:
1 Provide written instructions for copying or installing your solution to
your end-user’s hard disk.
1 Include software and instructions specifying how your end-users will
decompress your solution files.
1 If your end-users are installing your solution on Windows 3.1 or
Windows for Workgroups 3.11, provide instructions for optimizing
their hard disk for Win32s and installing Win32s.
1 If your solution might be run on a variety of operating systems, it is
safest to include all optional SDK files.
Installing Win32s
To run solution files on Windows 3.1 and Windows for Workgroups
3.11, your end-users will need to have Win32s 1.30c or later. You can
make disk copies of Win32s 1.30c from the CD-ROM or get the newest
version from Microsoft. See “Creating Win32s diskettes” on page 5-3.
To install Win32s:
1. Open the 386 Enhanced control panel and change the virtual memory
type to Permanent.
2. Make sure the swap file size is at least 20480 KB.
3. Select Use 32-Bit Disk Access and Use 32-Bit File Access, if available.
If any changes were made, they’ll need to restart Windows before
installing Win32s.