Owner's Manual

Sound
Setting
• Brightness: OFF
I
Level
01
- Level 10
(default: Level
OS)
• Beep:
ON
I
OFF (default: ON)
CD
USB
cable
(Included
with this device)
®
USB - micro
USB cable
(Sold separately)
®
OTG cable
(Sold separately)
Figure 1
3.
Press [SET] button to
complete
setting.
Note:
After
completing
settings it will
be back to
"Main
VOL"
setting
automatically
if you don't press
[MODE]
button or rotate the knob. Press
[MODE]
button to back to previous setting item.
Intelligent Tune
Detail
Setting
1.
Press [MODE] button and then rotate the
knob to select sound item
"Intelligent Tune
Detail
Setting".
Other
Settings
1.
Press
[MODE] button and
[SET]
button
simultaneously,
and maintain more than 3s.
When the setting item is
flashing,
rotate the
knob to switch setting item.
Initialize~
Firmware
update~
Navi mix
~Auto
Dimmer~
Software
Ver.
• Initialize:
User setting initialization.
• Firmware update:
If
you want to update
the firmware,
please consult
your
dealer.
•
Navi mix: When smartphone/tablet
and navigation unit are connected
simultaneously,
you can choose if the
navigation guide
would
be mixed or not.
Note:
The volume
of navigation voice can not be
adjusted by this unit. The
volume
of navigation
voice depends
on
which source it outputs
from, such as
Analog, Coaxial
.or
Optical.
•
Auto Dimmer: Automatic dimmer
ON/OFF.
14
Z3
2.
Press [SET]
button, and then rotate the knob
to switch
Intelligent
Tune sound according to
the
following
sequences.
Sound
Restorer~
Virtual
Bass~
Tone
Filter~
Reverb
Control
• Sound Restorer:
Full quality
sound
reproduction of compressed audio data.
• Virtual
Bass:
To
deliver powerful
bass just
like
an
add-on subwoofer.
• Tone
Filter: Control
the attack sound
and the reverberation of sound source
(instrument sound etc.).
• Reverb Control:
Reproduce the
natural
reverberation in the car by
controlling
the reverberation
included
in
the sound
source.
3.
Press [SET]
button, and rotate knob to switch
setting value.
• Sound
Restorer
I
Virtual Bass
I
Reverb
Control: OFF
I
Low/ Mid
I
High
(default:
OFF)
•
Tone
Filter:
Vivid+2
I
Vivid+ 1
I
OFF
I
Vintage+ 1
I
Vintage+2
(default: OFF)
4.
Press [SET]
button to
complete
setting.
Mute
Press
the knob to mute
ON/OFF.
•
Software
Ver.:
Display the version of
software.
2.
Press [SET]
button and rotate the knob or
press
[SET]
button to switch setting
value.
Note:
When the setting value
is
"ON/OFF",
please
press
[SET]
button to switch
ON/OFF.
• Initialize: Start?/Cancel?
Start?
-
Start
initialization.
Cancel?-
Cancel
initialization.
•
Firmware update:
Start?/Cancel?
Start?
- Start
update.
Cancel?
- Cancel
update.
•
Navi mix:
ON/OFF (default: ON)
•
Auto Dimmer:
ON/OFF (default: ON)
3.
Press [SET]
button to execute operation.