Owner's Manual

COMMANDER OPERATIONS
Rotary Knob
Display
Screen
_,.....---:------!---------,_
=s
0
~
"''
~.
0
:u11Di::•l:~:
1
--1----___./
'IL--------
i
--:
[SET]
button
[MODE]
button
Sound
Settings
1.
Press [MODE]
button, and setting item
is
flashing. Then rotate the knob, sound setting
is
switched according to the
following sequences.
Main
VOL
~
SW VOL
~
Memory
select
*
~
Intelligent
Tune
*
~
Intelligent
Tune Detail
Setting
*
~
Balance
~
Fader
~
Source
~
Audio
Sense
~
Brightness
~
Beep
•
Main VOL:
Adjust master volume.
The master volume of each source
is
independent of each other.
• SW VOL:
Adjust subwoofer volume. The
subwoofer volume of each source is
independent of each other.
•
Memory
select:
Switch
application
"Z-tune"
saved sound effect Custom Memory
(-+
Page 17
"Various
kinds
of
settings
of
Custom
Memory")
•
Intelligent
Tune Detail
Setting:
Intelligent
Tune detailed setting. It
can
only
be
displayed when the
Intelligent Tune setting
is"ON".
•
Intelligent
Tune: Turn on/off
Intelligent Tune
sound effect.
• Balance: Adjust volume balance of left and
right speakers.
•
Fader: Adjust volume balance of front and
rear speakers.
• Source: Switch
the input source of the
device.
•
Audio
Sense:
Adjust the input gain of
analog input.
•
Brightness:
Display brightness adjustment.
• Beep: Beep sound ON/OFF.
Note:
*
These items
will
not be displayed when you
use
"Z-tune"
application with connecting your
smartphone or tablet.
2.
Press
[SET]
button, and then rotate the knob
or press
[SET] button to adjust the setting
value.
Note:
When the setting value is "ON/OFF",
please
press
[SET]
button to switch
ON/OFF.
•
Main
VOL: -00 dB
-
-99 dB, 1 dB/step
(default:
-40
dB)
• SW VOL:
-10.0-
+
1
0.0,
0.5/1 step (default:
00.0)
•
Memory
select: Custom memory 1
-
4
(default: Custom memory
1)
•
Intelligent
Tune: ON
I
OFF (default:
ON)
•
Intelligent
Tune Detail Setting:
Sound
Restorer
I
Virtual Bass
I
Tone Filter
I
Reverb
Control
(Detailed operation
is
described
in
subsequent part additionally)
•
Balance: Left 12
-
Center
- Right 12
(default: Center)
•
Fader: Rear 12 -
Center
-
Front
12
(default: Center)
• Source:
Digital optical
I
Digital coaxial
I
Analog
I
USB
(default: Digital optical)
USB:
Smartphone or tablet supporting
USB
audio function. USB flash disk and
SO
card are not supported.
If
you want to enjoy the music of Android
smartphone or tablet, please connect the
smartphone or tablet with the main unit
through the
USB cables included with this
device. (Figure 1)
Note:
Please refer the Clarion website to check the
compatible Android smartphone and tablet.
•
Audio
Sense:
Low
I
Mid
I
High (default:
Low)
Z3
13