Owner's Manual
Table Of Contents
Sound Settings
1.
Start "Z-tune" application.
2.
Enter into precautions prompt screen after
initial start-up.
3.
After reading the precautions carefully, touch
Em.
and enter into main menu screen of
sound settings.
Note:
For the first time to launch application, it will
display Speaker Setting.
(-+
Page 19 "Speaker
Settin
@
• - : Close "Z-tune" application.
•
I:
Other settings.
•
@:
Various kinds of settings of Custom
Memory.
•
Cross Over setting .
•
Time Alignment setting .
•
Equalizer setting.
•
-:Turn
on/off Intelligent Tune sound
effect. After being turned off, it cannot set
Intelligent Tune.
• lj!tft!j!Mid: Intelligent Tune setting.
Various Kinds of Setting of Custom
Memory
Save the set sound effect (Cross Over, Time
Alignment and Equalizer). Then you can select
the sound effect settings through commander.
(-+
Page 13 setting item "Memory Select").
On the main menu screen, set the Custom
Memory through following operation.
• Select Custom Memory to
be saved in pull-down menu.
Custom
Memory
1mport
• : Import other Custom
Memory's sound setting (Cross Over, Time
Alignment and Equalizer) into current
Custom Memory.
•
E!\11:
After all setting items are adjusted,
back to main screen and touch the button
to save the settings in currently selected
Custom Memory.
Note:
It may need 3s for saving. During the saving
period, application cannot be operated. Don't
disconnect smartphone
or
tablet connection and
also don't shut off ACC
or
power. Otherwise, it
may cause the set contents are not saved.
•
lilt:
Lock the currently selected Custom
Memory. After being locked, adjustment
items (Cross Over, Time Alignment and
Equalizer), Custom Memory import and
Save function in Custom Memory cannot be
applied.
Cross Over Settings
Adjust the frequency and gain of each speaker.
1.
Touch
on the main menu screen and
enter into Cross Over setting screen.
•
-:
Select the speaker to be taken
Cross Over setting. Or touch other
trapezoid to switch to other speakers. 4
graphs mean 4 kinds
of
speakers.
• On the screen, take free adjustment for
Cross Over through finger.
• Frequency adjustment: Click on the
point of left or right hypotenuses,
and drag two hypotenuses to adjust
the frequency according to the arrow
direction.
Z3
17