Owner’s manual Mode d’emploi Manual de instrucciones Istruzioni per l’uso XMD3 AM/FM MARINE CD PLAYER RADIO AM/FM-LECTEUR CD MARIN REPRODUCTOR DE DISCOS COMPACTOS NÁUTICO CON RADIO DE AM/FM RADIO AM/FM CON LETTORE CD PER USO MARITTIMO
English Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. ∗ This manual includes the operating procedures of the CD changer, AUX, and TV tuner connected via the CeNET cable.
English 3. PRECAUTIONS 1. When it is very cold in the boat and the unit is used soon after switching on the heater, the disc and the optical components may become fogged and not operate properly. Wipe fogged discs with a soft cloth. Fogged optical components will naturally return to normal when the unit is left for about one hour after which it will operate normally. 2. When the boat is traveling in the rough seas the sound may skip as a result of intense vibrations and shock. 3.
Use only compact discs bearing the or mark. Do not play heart-shaped, octagonal, or other specially shaped compact discs. Some CDs recorded in CD-R/CD-RW mode may not be usable. Handling • Compared to ordinary music CDs, CD-R and CD-RW discs are both easily affected by high temperature and humidity and some of CD-R and CD-RW discs may not be played. Therefore, do not leave them for a long time in the car. • New discs may have some roughness around the edges.
Source unit / Appareil pilote / Unidad fuente / Unità sorgente [RPT] [HOOK] [SCN] [RDM] [PWR] English English 2. CONTROLS/COMMANDES/CONTROLES/CONTROLLI [DN], [UP] [DOOR] [P/A] [D] [M] [T] [Z+] [a], [d] [ISR] [BAND] [w], [z] [DIRECT] [s] [A-M] With the [DOOR](door) opened / Avec le volet [DOOR] ouvert / Con la puerta [DOOR] abierta / Con [DOOR] (sportello) aperto [RESET] [CD SLOT] [Q] Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
English 4. NOMENCLATURE Note: • Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 3 (unfold). Names of the Buttons and their Functions [ PWR ] button [ A-M ] button • Press the button to turn on the power. Press and hold the button for 1 second or longer to turn off the power. • Switches the operation mode among the radio mode, etc. • Press and hold the button for 1 second or longer to switch the MAGNA BASS EXTEND on or off.
English Major Button Operations when External Equipment is Connected to This Unit ● When the CD changer is connected ∗ For details, see the section “CD changer operations”. [ SCN ] button • Performs scan play for 10 seconds for each track. Disc scan play is performed when the button is pressed and held. [ RPT ] button • Performs repeat play. When this button is pressed and held, disc repeat play is performed. [ RDM ] button • Performs random play.
English Display Items Z-Enhancer Plus indication Operation status indication • Titles, frequency, PS names, clock, etc. are displays. : Preset channel indication (1 to 6) Disc number indication (1 to 6) : Disc indication : Scan indication : Repeat indication : Random indication : Stereo indication : Manual indication : Enter indication : MAGNA BASS EXTEND indication : Mute indication LCD Screen In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.
■ XMD3 following operations are enabled by remote control with the Wired Remote Control Unit MR301RC (sold separately). WIRED REMOTE CONTROL UNIT Display Items Operation status indication • Frequency, clock, etc. are displays.
English 6. OPERATIONS Note: Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 3 (unfold). Basic Operations Main display CAUTION When this unit is turned on, starting and stopping the engine of a boat with its volume raised to the maximum level may harm your hearing. Be careful about adjusting the volume.
Adjusting the subwoofer Adjusting the fader When you default select one of mode (LPF50, LPF80, LPF120) 1. Press the [ A-M ] button and select “FAD 0”. 2. Press the [ w ] button emphasizes the sound from the front speaker, press the [ z ] button emphasizes the sound from the rear speaker. ∗ The factory default setting is “S-VOL 0”. (Adjustment range: -6 to +6) 1. Press the [ A-M ] button and select “S-VOL 0”. 2. Press the [ w ] or [ z ] button increases or deceases the subwoofer volume.
English Radio Operations FM reception Seek tuning For enhanced FM performance the tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits. 1. Press the [ BAND ] button and select the desired band (FM or AM). Changing the reception area 2. Press the [ a ] or [ d ] button to automatically seek a station.
CD Operations Preset scan Loading a CD Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. 1. Press the [ P/A ] button. 2. When a desired station is tuned in, press the [ P/A ] button again to continue receiving that station. 1. Open the door by push up the [ HOOK ]. 2. Insert a CD into the centre of the [ CD SLOT ] with the label side facing up, and completely close the [ DOOR ].
English CD Operations Operations Common to Each Mode Selecting a track Entering titles ● Track-up 1. Press the [ d ] button to move ahead to the beginning of the next track. 2. Each time you press the [ d ] button, the track advances ahead to the beginning of the next track. Titles up to 8 characters long can be stored in memory and displayed for CD, CD changer and TV stations. The number of titles that can be entered for each mode are as follows. ● Track-down 1.
Dimmer control You can setting the dimmer control on or off. 6. Press the [ s ] button to store the time into memory. 7. Press the [ T ] button to return to the previous mode. ∗ The factory default setting is “ON”. Note: 1. Press and hold the [ T ] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [ a ] or [ d ] button to select “DIMMER”. 3. Press the [ w ] or [ z ] button to select “ON” or “OFF”. 4. Press the [ T ] button to return to the previous mode.
English 7. OPERATIONS OF ACCESSORIES CD Changer Operations CD changer functions Selecting a CD When an optional CD changer is connected through the CeNET cable, this unit controls all CD changer functions. This unit can control a total of 2 changers. Press the [ PWR ] button and select the CD changer mode to start play. If 2 CD changers are connected, press the [ PWR ] button to select the CD changer for play. 1. Press the [ UP ] or [ DN ] button to select the desired disc.
TV Operations Disc repeat play TV tuner functions After all the tracks on the current disc have been played, disc repeat play automatically replays the current disc over from the first track. This function continues automatically until it is cancelled. 1. Press and hold the [ RPT ] button for 1 second or longer. “DISC” and “RPT” light in the display and disc repeat play starts. 2. To cancel disc repeat play, press and hold the [ RPT ] button again.
English TV Operations Recalling a preset station Setting the TV diver A total of 12 TV stations can be stored (6-TV1 and 6-TV2). This allows you to select your favorite TV stations and store them in memory for later recall. 1. Press the [ BAND ] button and select the desired TV band (TV1 or TV2). 2. To recall a stored TV station, press the desired [ DIRECT ] button to select that station. You can change the reception setting for the TV antenna connected to the TV tuner. 1.
Problem Power does not turn on. (No sound is produced.) Cause Solution Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. Compact disc cannot be loaded. Another compact disc is already loaded. Eject the compact disc before loading the new one. Sound skips or is noisy. Compact disc is dirty. Clean the compact disc with a soft cloth. Compact disc is heavily scratched or warped.
If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. CD Error Display CD changer English 9. ERROR DISPLAYS Cause Measure ERROR 2 A CD is caught inside the CD deck and is not ejected. This is a failure of CD deck’s mechanism and consult your store of purchase. ERROR 3 A CD cannot be played due to scratches, etc. Replace with a non-scratched, non-warped-disc.
FM Tuner Frequency Range : Europe U.S.A Australia Usable Sensitivity 50dB Quieting Sensitivity Alternate Channel Selectivity Stereo Separation (1 kHz) Frequency Response (±3 dB) Audio : 87.5 MHz to 108.0 MHz : 87.9 MHz to 107.9 MHz : 87.0 MHz to 108.0 MHz : 9 dBf : 15 dBf : 70 dB : 35 dB : 30 Hz to 15 kHz Maximum Power Output : 208 W (52 W ✕ 4 ch) (U.S.A/Australia) Power Output : 4 ✕ 27 W (DIN 45324, +B=14.
XMD3
