Owner's Manual

XM Radio Operations
This functtion is available when XM Radio
receiver is connected through the dedicated
connections. Listeners can subscribe to
XM® Radio on the Web by visiting
www.xmradio.com. or by calling
[phone]. Customers should have
their Radio
ID ready. (see "Displaying the
Identification (ID) Code").
Customers can receive a limited number
of free-to-air channels without activation.
Selecting
XM Radio mode
1. Press the
[SRC] button on the front panel
or remote control to switch to the
SAT source.
INFORMATION ON THE SCREEN:
1. SAT Channel/Category Name
2. SAT Channel Number
3. SAT Band
4. Time Clock
5. Artist and Title Information
6. Current Preset Channels
7. Source Indicator
Displaying the Identification (10) Code
To display the radio ID, press the [OPT]
button on the front panel three times or
use the
[I .... ] tuning button to tune to
channel
"000". The screen displays the
radio
ID where the channel name is usually
displayed.
Band selection
Press the [BAND] button to change between
three
SAT bands (SAT 1, SAT2 and SAT3).
Each band stores up to six preset stations.
Station selection
Press the [ ..... ] [~] button to tune to
another station.
VZ309
Preset mode
Six numbered preset buttons store and recall
stations for each band. The stored stations
(P1 -P6) for the current band can be viewed
on the screen. Use the remote control [~] [ A]
up/down arrow buttons to scroll through the
preset station list.
Storing a Station
1. Select a band (if needed), then select a
station.
2. Press and hold a preset button (numbers 1-6)
on the front panel or remote control.
3. The preset number and station is displayed
and highlighted.
Recalling a Station
1. Select a band (if needed).
2. Press a front panel or remote control preset
button (numbers 1-6) to select the
corresponding stored station.
Channel Search
To access Channel Search mode, press the
[OPT] button on the front panel. The list of all
available channels appears
on the screen.
1. Rotate the rotary knob
on the panel or press
the
[~ ] [A] up/down arrow keys on the
remote control to navigate the list of channels.
2. Press the the rotary knob or the [ENTER]
button
on the remote control to select a
channel.
Category Search
To access Category Search mode, press the
[OPT] button on the front panel twice. The list of
available categories appears
on the screen.
2. Rotate the rotary knob or press the [~] [A]
up/down arrow keys on the remote control to
navigate the list of categories.
3. Press the rotary knob or the [ENT] enter
button
on the remote control to select the
desired category. A list of stations
in the
selected category appears
on the screen.
23