Owner's Manual

iPod Operations
Fast forward and fast backwardplayback
Press and hold the [~] or [ ..... ] buttons
on the control panel or remote control for fast
forward or fast reverse. Release the button to
resume normal playback.
PhotoNideo playback
To view photos and videos on the screen, you
must use the iPod to control photo and video
playback options.
1. Press the [TITLE] button on the remote
control
or press and hold the [OPT] button on
the front panel.
2. Select video media to be displayed on
monitor.
3. Press the [AUDIO] button on the remote
control or press the [OPT] button on the front
panel to return to iPod music mode.
NOTE: Video playback is not available on all
iPod devices. Please contact your
Clarion dealer for details.
NOTE: To transmit the video from your iPod to
the screen, you must set the following
options through the iPod video settings
menu: TV Out
= On, TV Signal =NTSC,
and Widescreen = On.
NOTE: After disconnecting your iPod, the unit
will always return to the last mode
accessed when the iPod is plugged back
into the unit.
AUX in Operations
External peripheral devices, including a game
console, camcorder, navigation unit, iPod, etc.
can be connected to the AUX IN connector
on the front of this unit using the
AN media
cable.
...
AWARNING
For your safety, the driver should not
watch the VTR, etc. or operate the controls
while driving. Please note that watching
and operating the VTR, etc. while driving
are prohibited by law in some countries.
NOTE:
For your safety, the unit has a safety function,
which turns
off the picture when car is moving,
so only the audio can be heard. The picture can
be only watched, when the
car is stopped and
parking brake is applied.
22
Switching to AUX In mode
Press [SRC] button to select AUX IN mode
(when unit is reading). The LCD will display
the external video.
You cannot directly control
external devices connected to the AUX
IN input.
VZ309