Owner`s manual

Video CD Operations
35
VX709A
English
Owner’s manual
Skipping a track (searching)
1. Press the [R] or [F] button during
playback.
The track is skipped and playback starts.
• Pressing the [F] button starts playback
from the beginning of the next track.
• Pressing the [R] button starts playback
from the beginning of the current track.
When this button is pressed again within
about 2 seconds, playback starts from the
beginning of the previous track.
• You can also use the [R] and [F] keys
instead of the [R] and [F] buttons.
Fast forward and fast backward
1. Press and hold the [R] or [F] button
during playback.
The playback speed becomes 4-time faster at
first and then 16-time faster 3 seconds later.
Releasing the button resumes the normal
speed playback.
• No audio is reproduced during fast forward
and fast backward operation.
• You can also use the [R] and [F] keys
instead of the [R] and [F] buttons.
Changing audio output channels
You can change the audio output channels.
1. Showing the Video CD mode screen, touch
the [Options] key.
2. Touch the [LR], [LL], or [RR] key of the Audio
item to select the output channel.
LR: Left and Right channels
LL: Left channel only
RR: Right channel only
3. Touch the [Back] key to return to the previous
screen.
Setting the Playback Control
function
On Video CDs equipped with Playback Control
function, you can turn it on/off.
• The factory default setting is “OFF”.
1. Showing the Video CD mode screen, touch
the [Options] key.
2. Touch the [ON] or [OFF] key of the PBC item
to set the function ON or OFF.
3. Touch the [Back] key to return to the previous
screen.
Note:
• When the PBC setting is changed, the disc plays
from the beginning.
Displaying the playback status
• The factory default setting is “OFF”.
1. Showing the Video CD mode screen, touch
the [Options] key.
2. Touch the [ON] or [OFF] key of the P. Time
item to set the function ON or OFF.
3. Touch the [Back] key to return to the previous
screen.
Note:
• This function is disabled when the PBC function is
set to ON.
Selecting the screen size
You can change the screen size to suit to the
playback film.
• The factory default setting is “F.Wide”.
1. Touch the screen to display the Video CD
mode screen.
2. Repeat touching the [Wide/F.Wide/Cinema/
Normal] key until your desired screen size is
selected.
• This key shows the current screen size
setting.
[Wide]:
The image is expanded in the same way as
the [F.Wide] setting, but the width will become
narrower. Depending on the image data,
black areas may be displayed at the both
sides of the screen.
[F.Wide]:
The image is expanded so that the rectangle
of the image fits to the screen (16:9). The
aspect ratio of the image may be changed.
[Cinema]:
The image is expanded so that the top and
bottom edges of the image fit to the screen.
Suitable for letterbox-format images. Subtitles
of non-letterboxed images may be cut off in
this mode.
[Normal]:
The image is expanded so that the top and
bottom edges of the image fit to the screen,
and that the aspect ratio of the image
becomes 4:3. The aspect ratio of the image
may be changed.
3. Touch the [Hide] key to return to the playback
screen.