Operation Manual

English
VX402E/VZ402E 33
English
Owner’s Manual
Radio Operation
Listening to the Radio
TouchtheTunerbuttonontheMainmenudisplay.
The tuner mode screen is displayed.
Touch the [Band] keyortouchthe [Band] button
onremotecontroltoselecttheradioband.Each
timethebuttonispressed,theradioreception
bandchangesinthefollowingorder:FM1,FM2,
FM3, AM, FM1...
Seek Tuning
1. Touch the [Band]keytoselecttheradioband
(FM or AM).
2.Touchthe[ ]or[ ]keytoautomatically
seekastation.
• Whentouchingthe[
]key,thestationis
soughtinthedirectionofhigherfrequencies.
• Whentouchingthe[
]key,thestationis
soughtinthedirectionoflowerfrequencies.
Manual Tuning
1. Touch the [BAND]keytoselecttheradioband
(FM or AM).
2.Touchthe[
]or[ ]keytoautomatically
seekastation.
• Whentouchingthe[
]key,thestationis
soughtinthedirectionofhigherfrequencies.
• Whentouchingthe[
]key,thestationis
soughtinthedirectionoflowerfrequencies.
Recalling a preset station
There are 2 ways to recall the preset station.
Using the remote control:
1. Touch the [Band]buttontoselectthedesire
band(FMorAM)ontheremotecontrol.
2.Touchthepresetnumber(1to6)onnumeric
pad.
Using the tuner unit:
1. Touch the [Band]keytoselectthedesireband
(FM or AM) on the tuner.
2.Touchthe[ ]keytodisplaythePresetList
screen.
3. Touch the preset station (1 to 6) on tuner
display.
4.Touch[ ]or[ ] to select next station up or
down the preset list.
5. Touch the [AS/PS]buttontobeginscanning
the preset stations.
Manual memory
1.TouchthedesiredBandkeytoselecttheband
you wish to store in.
2.Tuneinthestationyouwishtostoreusingseek
tuning, manual tuning, or preset tuning.
3.TouchandholdthedesiredPresetkeyyou
wish to store the current station for more than
2 seconds.
4.Touch[
]or[ ] to select next station up or
down the preset list.
Auto Store
The Auto Store is a function for storing up
to 6 stations that are automatically tuned in
sequentially.If6receivablestationscannotbe
received,apreviouslystoredstationremainsat
the memory position.
1. Touch the [Band]keytoselectthedesired
band.(FMorAM)
2. Touch and hold the [AS/PS]keytostartthe
AutoStorefunction.Abeepsoundsand
the stations with good reception are stored
automatically to the preset channels.
Preset Scan
ThePresetScanreceivesthestationsstored
in the preset memory in order. This function is
useful when searching for the desired station in
memory.
1. Touch the [Band]keytoselectthedesired
band.(FMorAM).
2. Touch the [
]keytodisplaythePresetList
screen.
3. Touch the [AS/PS]keytostartthePreset
Scan. The unit starts scanning each station for
10secondssequentially.Presetswithaweak
signalwillbeskipped.
4. When the desired station is tuned in, touch
the [PS]keyagaintocontinuereceivingthat
station.