Owner`s manual

VRX928RVD 29
English
Owner’s manual
∗ When the reception deteriorates, the “AF” indica-
tor flickers.
●AF function between RDS and DAB
Refer to the item of DAB Operations.
REG (Regional programme)
function
When the REG function is ON, the optimum re-
gional station can be received. When this func-
tion is OFF, if the regional station area switches
as you drive, a regional station for that region is
received.
∗ The factory default setting is “OFF”.
Notes:
• This function is disabled when a national station
such as BBC 2 FM is being received.
• The REG function ON/OFF setting is valid when
the AF function is ON.
●Turning the REG function ON
When “REG” is not lit in the display, touch the
[RDS MODE] key in the MENU screen and the
[REG] key appears in the display.
Touch the [REG] key and “REG OFF” switches
to “REG ON”.
“REG” lights in the display.
●Turning the REG function OFF
Touch the [RDS MODE] key in the MENU screen
and the [REG] key appears in the display.
Touch the [REG] key and “REG ON” switches to
“REG OFF”.
“REG” in the display goes off.
Manually tuning a regional station
in the same network
Note:
• This function can be used when a regional broad-
cast of the same network is received.
1. This function is valid when the AF function is
ON and the REG function is OFF.
2. Press any one of the [DIRECT] buttons to
call out a regional station.
3. Each time you press the same [DIRECT] but-
ton, the unit switches from a local station to
the other on the same network.
RDS Operations
TA (Traffic Announcement)
In TA standby mode, when a traffic announce-
ment broadcast starts, the traffic announcement
broadcast is received as top priority regardless
of the function mode so you can listen to it. Traf-
fic programme (TP) automatic tuning is also
possible.
∗ RDS interrupt does not function during AM radio
reception or in TV mode.
∗ This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
●Setting TA standby mode
If you press the [TA] button when only “TP” is lit
in the display, “TP” and “TA” light in the display
and the unit is set into TA standby mode until a
traffic announcement is broadcast. When a traf-
fic announcement broadcast starts, “TRA INFO”
appears in the display. If you press the [TA] but-
ton while a traffic announcement broadcast is
being received, the traffic announcement broad-
cast reception is cancelled and the unit goes
into TA standby mode.
●Cancelling TA standby mode
With “TP” and “TA” are lit in the display, press
the [TA] button. The “TA” in the display goes off
and TA standby mode is cancelled.
∗ If “TP” is not lit, pressing the [TA] button searches
for a TP station.
●Searching for a TP station
When “TP” is not lit, if you press the [TA] button,
“TA” lights in the display and the unit automati-
cally searches a TP station.
Note:
• If a TP station is not received, the unit continues
the search operation. Pressing the [TA] button
again makes the “TA” indicator go off and stops
TP station searching.
• The same operation can be performed by the
touch key on the screen instead of the [TA] but-
ton.
Touch the screen switching touchkey when the
STANDARD screen is showing or press the
[LIST] button, the MENU screen appears.
Touch the [SUB MODE] key in the MENU
screen and the [TA] key appears in the display.