Owner`s manual

VRX928RVD 27
English
Owner’s manual
●Using the [DIRECT] buton.
1. Press the [BND] button and select the de-
sired band. (FM or AM (MW/LW))
2. Press the corresponding [DIRECT] button to
recall the stored station.
∗ Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store that station
into preset memory.
●Using the [DIRECT] key.
1. Press the [LIST] button or touch the screen
when the STANDARD screen is displayed,
then touch the [P.CH SELECT] key.
2. Touch the corresponding [DIRECT] key to re-
call the stored station.
∗ You can select the desired band to touch the
[BAND] key.
3. Touch the [RTN] key or press the [LIST] but-
ton to return to the previous mode.
Manual memory
1. Press the [BND] button and select the de-
sired band. (FM or AM (MW/LW))
2. Select the desired station with seek tuning,
manual tuning, or preset tuning.
3. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
Auto store
Auto store is a function for storing up to 6 sta-
tions that are automatically tuned in sequentially.
If 6 receivable stations cannot be received, a
previously stored station remains unoverwritten
at the memory position.
1. Press the [BND] button and select the de-
sired band. (FM or AM (MW/LW))
2. Touch the screen switching touchkey when
the STANDARD screen is showing or press
the [LIST] button, the MENU screen ap-
pears.
3. Touch the [SUB MODE] key in the MENU
screen and the [AUTO STORE] key appears
in the display.
4. Touch and hold the [AUTO STORE] key for 2
seconds or longer.
The stations with good reception are stored
automatically to the preset channels.
Selecting stations with the KEY PAD
∗ This function displays the KEY PAD on the screen
enabling you to tune in through auto store or pre-
set scan.
Press the [KEY PAD] button to display the KEY PAD.
Radio Operations
●To use auto store,
touch the [AS] key for about 2 seconds.
●To perform a preset scan,
touch the [PS] key.
●To cancel the KEY PAD display,
press the [KEY PAD] button or touch the [OFF] key.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the fre-
quency changes one step at a time. In quick tuning
mode, you can quickly tune the desired frequency.
1. Press the [BND] button and select the de-
sired band. (FM or AM (MW/LW))
∗ If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer.
“MANU” appears in the display and manual
tuning is now available.
2. Tune into a station.
● Quick tuning:
Press and hold the [a] or [d] button for 1
second or longer to tune in a station.
● Step tuning:
Press the [a] or [d] button to manually
tune in a station.
Note:
• Manual tuning is cancelled if you do not operate
the unit for 7 seconds or longer.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio sta-
tions in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio fre-
quency automatically.
There are 2 ways available to recall the preset
station.