English Color LCD Display • Radio/RDS/DAB/TV mode : PROGRAM WEST COAST (station name) • CD changer mode : USER TITLE SHINE (user title) Owner’s manual • Radio mode: FM1 98.1MHz Pch 1 (band/frequency/preset No.) • RDS mode : FM1 CLASSICS Pch 1 (band/PTY name being received/preset No.) • DAB mode : M1 CLASSICS Pch 1 (band/PTY name being received/preset No.) • DVD changer mode : D2 T02 C002 01:08:20 (disc No./title No./chapter No./ playback time) • DVD video mode : T01 C003 00:08:20 (title No.
English 5. OUTLINE OF BUTTON AND TOUCHKEY OPERATION WHEN THE DISPLAY IS OPEN Owner’s manual ∗1 ∗2 ∗3 Note: • The background of some screens in the following sections have been simplified to make it easier to see the keys in each procedure. ∗1: The STANDARD screen indication in the radio mode ∗2: Press an operation button to switch the STANDARD screen. The operation button is [FUNC ] button in the description of operation per mode.
English Owner’s manual ∗8 (ADJUST MODE menu) ∗6 1 STOP ∗7 CONNECT COMPOSITE (DVD SETUP menu) ∗6 PARENTAL LOCALE VRX928RVD 11
English Owner’s manual (AUDIO MODE menu) BASS BOOST DETAIL EQ LEVEL 12 VRX928RVD (KEY PAD) ∗9
English ∗8 (MOTION/SPRITEmenu) (DVD video menu) SPRITE ∗11 WALL COLOR ENT Notes: ∗8: This icon [ ] is displayed to indicate that the button should be held down for 1 second or longer. ∗9: This shows a KEY PAD selection example in the radio mode. ∗10: Use this button during DVD, video CD and MP-3 playback. ∗11: When the KEY PAD is difficult to view, press the touch key on the right (left) side of the screen to move it to the other side of the screen.
English 6. REMOTE CONTROL Owner’s manual Remote control unit Signal transmitter Operating range: 30˚ in all directions [CeNET] [BAND] [MUTE] [FUNC] [VOLUME] [P.TIME] [0-9] [ [DISC SEL] [ ],[ [SEARCH MODE] [MENU] [TITLE] [SET UP] [ENT] [RPT] ] ] [RTN] [ ] [ [ ],[ ] [SCAN] [ ],[ ] ],[ [RDM] [AUDIO] ] [PBC] [SLOW] [ANGLE] [SUB TITLE] Inserting the Batteries 1.Turn the remote control unit over, then slide the rear cover in the direction of the arrow. 2.
●Shared modes [FUNC] button ∗ Can not turn power on or off. [VOLUME] button • Press to turn on and off the playtime display in the DVD video and video CD mode. • Press and hold this button for 1 second or longer to switch the playback status display contents. • Increases and decreases volume. [ß] button [MUTE] button • Press to stop video playback in DVD video and video CD mode. • Turns mute on and off. [CeNET] switch • For operating this unit, switch this switch to the CeNET position.
English Functions of Remote Control Unit Buttons [ ][ ] buttons Owner’s manual • Press to select the next higher or lower chapter number in DVD video mode. • Press to select the next higher or lower track numbers in CD/MP-3 mode or video CD mode with the PBC function turned off. [A] [D] button ● CD/MD changer mode [BAND] button • Press to switch discs. [DISC SEL] button • Used to change the disc. • Hold down to perform fast-forward and fastbackward.
2. Press the right side of the DCP carefully to fit it in place. Owner’s manual The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. We recommend taking the DCP with you when leaving the car. Removing the DCP 1. Turn the power off. 2. Slide the [RELEASE] lever leftward to release the DCP/Operation Panel. DCP 3. Press the [FUNC] button to turn on the power. CAUTION DCP 3.
English 8. CAUTIONS ON HANDLING LCD panel/Generalities Owner’s manual For a longer service life, be sure to read the following cautions. • Be sure to store the LCD panel inside the main unit when parking the car outdoors for long period of time. The LCD panel will operate properly in a temperature range of 0 to 60˚C. • Don’t allow any liquids on the set from drinks, umbrellas etc. Doing so may damage the internal circuitry. • Do not disassemble or modify the set in any way. Doing so may result in damage.
Storage • New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc. • Do not expose discs to direct sunlight or any heat source. • Do not expose discs to excess humidity or dust. • Do not expose discs to direct heat from heaters. Ball-point pen Roughness • Never stick labels on the surface of the disc or mark the surface with a pencil or pen.
English 9. DVD VIDEO SYSTEM Owner’s manual DVD video is a high-quality digital video source that provides crisp and clear images. One 12 cm disc contains either one film or four hours of music. DVD Video Features This unit provides the following functions in addition to the high image quality and sound quality of DVD video. Notes: • Some disc functions may operate differently than described in this manual.
Discs TV color system Playable discs DVD video discs video CDs CD TEXT Audio CDs About CD Extra discs A CD Extra disc is a disc in which a total of two sessions have been recorded. The first session is Audio session and the sedond session Data sessioin. Your personally-created CDs with more than 2 data sessions recorded cannot be played on this DVD video player. Discs that cannot be played back This DVD video player cannot play back DVD-R, DVD-RAM, DVD-ROM, CD-ROM, Photo CDs.
English 10. OPERATIONS Basic Operations Note: Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 (unfold). Owner’s manual CAUTION When the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may harm your hearings. Be careful about adjusting the volume. Note: • Use this unit after starting the engine. Adjusting the volume 1.
Opening and turning the display WARNING Standing up the liquid crystal panel The angle of the liquid crystal panel or protruding amount of the panel from the mounting surface can be adjusted depending on the mounting angle of the unit or light coming into the car. ● To adjust the angle 1. Every time the [TILT] button is pressed, the liquid crystal panel tilts forward or backward at up to about 20 degrees. The adjusted angle is stored in memory. 20˚ 20˚ 1.
English Basic Operations Owner’s manual Turning the liquid crystal panel horizontal (Air conditioner operation mode) When the way the liquid crystal panel is mounted hinders the operation of the air conditioner, the position of the panel can be turned horizontal temporarily. 1. Press and hold the [OPEN] button when the liquid crystal panel is upright, and release the button when a beep is heard. 2. The liquid crystal panel turns horizontal.
Adjusting the MID Adjusting the TREBLE The treble gain and treble frequency (center frequency) can be adjusted as follows. 1. Press the [A-M] button, then touch the [USER CUSTOM] key. 2. Touch the [DETAIL] key, then touch the [TREBLE] key. 3. When the bass type selection screen is displayed, touch the key for the desirable type to select it. 4. Touch the [w] or [z] key to adjust to desirable level. GAIN : –6 to 6 (The factory default setting is “0”) FREQ.
English Basic Operations Radio Operations Changing the setting of the display background Listening to the radio Owner’s manual WARNING Perform the setting of this function the car is stopped with the parking break applied. 1. Press the [DISP] button for 1 second or longer to show the background setup menu. ∗ This menu can be displayed only in the radio, DVD (CD, MP3) or CD/MD changer mode and only while your car is deing driven. 2. Touch the setting key to show the setup display.
Selecting stations with the KEY PAD Press the [KEY PAD] button to display the KEY PAD. ●Using the [DIRECT] buton. 1. Press the [BND] button and select the desired band. (FM or AM (MW/LW)) 2. Press the corresponding [DIRECT] button to recall the stored station. ∗ Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store that station into preset memory. ●To use auto store, touch the [AS] key for about 2 seconds. ●To perform a preset scan, touch the [PS] key.
English Owner’s manual Radio Operations RDS Operations Preset scan RDS (Radio Data System) Preset scan receives the stations stored in preset memory in order. This function is useful when searching for desired station in memory. 1. Touch the screen switching touchkey when the STANDARD screen is showing or press the [LIST] button, the MENU screen appears. 2. Touch the [SUB MODE] key in the MENU screen and the [PRESET SCAN] key appears in the display. 3. Touch the [PRESET SCAN] key to start preset scan.
∗ When the reception deteriorates, the “AF” indicator flickers. REG (Regional programme) function When the REG function is ON, the optimum regional station can be received. When this function is OFF, if the regional station area switches as you drive, a regional station for that region is received. ∗ The factory default setting is “OFF”. Notes: • This function is disabled when a national station such as BBC 2 FM is being received. • The REG function ON/OFF setting is valid when the AF function is ON.
English RDS Operations Auto store function for TP stations Owner’s manual You can automatically store up to 6 TP stations into preset memory. If the number of TP that can be received is less than 6, broadcast stations already stored in memory are left without being overwritten. 1. With “TA” lit in the display, touch the [SUB MODE] key in the MENU screen to select the [AUTO STORE] key. Touch the [AUTO STORE] key for 2 seconds or more. 2.
PTY item Contents News News Affairs Current Affairs Info Information Sport Sport Educate Education Drama Drama Culture Culture Science Science Varied Varied Pop M Pop Music Rock M Rock Music Easy M Easy Listening Music Light M Light Classical Music Classics Serious Classical Music Other M Other Music Weather Weather Finance Finance Children Children’s Programmes Social Social Affairs Religion Religion Phone in Phone In Travel Travel Leisure Leisure Jazz Jazz M
English DVD Video Player Operations Changing DVD system settings Owner’s manual Notes: • If the SETUP operation is performed in the middle of video CD/DVD video play, the disc plays from the beginning. • Various settings of the SETUP menu cannot be made with the remote control unit. ●When watching through a conventional type of the rear view monitor (4:3) • N PS : The leftmost and rightmost areas of the screen are cut off. Selecting the DVD SETUP menu 1.
Setting up the disc menu language. ∗ The factory default setting is “ENGLISH”. 3. Touch the [RTN] key to return previous mode. Setting up the audio language 1. Following the steps 1 to 2 in “Selecting the DVD SETUP menu”, touch the [AUDIO LANGUAGE] key. Each time you touch the [AUDIO LANGUAGE] key, you can switch the language list display. 2. Touch the key to select a desired language to set it. ∗ The factory default setting is “ENGLISH”. 3. Touch the [RTN] key to return previous mode.
English DVD Video Player Operations Country Input code Owner’s manual SAN MARINO SAUDI ARABIA SLOVAKIA (Slovak Republic) SLOVENIA SOUTH AFRICA SPAIN SWAZILAND SWEDEN SWITZERLAND SYRIAN ARAB REPUBLIC TURKEY UNITED ARAB EMIRATES UNITED KINGDOM Vatican City State YEMEN YUGOSLAVIA FAROE ISLANDS GIBRALTAR GREENLAND SVALBARD AND JAN MAYEN ISLANDS 8377 8365 8375 8373 9065 6983 8390 8369 6772 8389 8482 6569 7166 8665 8969 8985 7079 7173 7176 8374 3. Touch the [ENT] key. 4.
Watching/Listening to a disc already inserted WARNING • Videos may be played back with particularly loud sound. Increase the volume gradually from the minimum after the video images are displayed. • For your safety, the driver should not watch the video or operate the controls while driving. Please note that watching and operating the video while driving are prohibited by law in some countries.
English DVD Video Player Operations Owner’s manual 1. Touch the [SRCH ] key to switch the KEY PAD. 2. Touch the [0]-[9] key that corresponds to the title number you desired. When you touch the wrong number ([0]-[9] key), you can cancel the key input by touching the [DEL ] key. • DVD video mode: select the title number. • Video CD mode (with the PBC function turned off): select the track number. • CD mode: select the track number. • MP3 mode: select the file (track) number. 3. Touch the [ENT ] key.
Skipping a chapter (searching) When the KEY PAD becomes difficult to view in the menu display, you can move it to the other side of the screen. About chapter Chapter means a small segment to divide the data area of the disc. 1. Press the [a] or [d] button during playback. Chapters are skipped, as many as the times the button is pressed, and playback starts. KEY PAD or Chapter down KEY PAD Stopping playback 1. Press and hold the [s] button for 1 second or longer during playback. Playback stops. 2.
English DVD Video Player Operations Owner’s manual 2. Touch the [SRCH] key. Each time you touch the [SHIFT] key, you can switch between title number input “[T**]” and chapter number input “[C***]”. • Title A large segment to divide the data area of the disc. • Chapter A small segment to divide the data area of the disc. 3. Input the number of the title that you want to play back with the [0] to [9] key. 4. Touch the [ENT] key. Playback starts from the scene of the input title number or chapter number.
Switching subtitles Off Subtitle 1 Subtitle 2 Subtitle X • It may take time to switch among angles. • Depending on the disc, scenes recorded in two or more angles may be played back. Displaying the playback status 1. Press the [DISP] button or touch the [P.TIME] key in the sub KEY PAD display (using the procedures described in the section “KEY PAD operation”) during playback.
English Showing the V-CD menu (for V-CD discs with PBC) Owner’s manual DVD Video Player Operations This key does not function on some discs. 1. Press the [MENU] button during playback. The V-CD menu appears. The displayed contents may differ, depending on the V-CD software. • Example showing menu display Skipping a track (searching) 1. Press the [a] or [d] button during playback. The track is skipped and playback starts.
Changing audio output You can change the audio output method. 1. Display the sub KEY PAD using the procedures described in the section “KEY PAD operation”. 2. Touch the [AUDIO] key during playback. Each time you touch the key, you can switch among audio output methods. LL (Left) RR (Right) LR (Stereo) Other various play functions 1. Touch the screen, the MENU screen appears. 2. Touch the [SUB MODE] key in the MENU screen to show SUB MODE. 3. Touch the touch key of the function you want to play.
English DVD Video Player Operations Listening to a CD ∗ This unit is a CD TEXT compatible model. Owner’s manual This unit supports the display of the DISC TITLE, TRACK TITLE and ARTIST of the CD TEXT. After disc loading, the play mode is automatically engaged. Note: This unit supports only CD TEXT in English. Also, some character data may not be reproduced properly on the display. 1. Press the [KEY PAD] button and toch the [SRCH] key. 2.
Displaying CD titles This unit can display title data for CD-text CDs. ∗ This function is enabled only when the panel is open. Listening to an MP3 This unit is a ID3 Tag compatible model. This unit supports the title, artist and album display of the ID3 Tag versions 1.0 and 1.1. After disc selection, the play mode is automatically engaged. What is MP3? MP3 is an audio compression method and classified into audio layer 3 of MPEG standards.
English DVD Video Player Operations Skipping a track (searching) Owner’s manual 1. Press the [a] or [d] button during playback. Tracks are skipped, as many as the times the button is pressed, and playback starts. • Press the [d] button, and playback starts from the beginning of the next track. • Press the [a] button, and playback starts from the beginning of the current track. When this button is pressed again within about 2 seconds, playback starts from the beginning of the previous track.
Changing the display of the playback status TOP function The TOP function resets the DVD player to the first track of the disc. 1. Press the [BND] button to playback the first track(track No. 1). This function is available when a VTR, etc. is connected to the visual 1 or visual 2 terminal. WARNING For your safety, the driver should not watch the VTR, etc. or operate the controls while driving. Please note that watching and operating the VTR, etc. while driving are prohibited by law in some countries.
English VISUAL Operations Owner’s manual ● “HUE”: Adjust the tone of color (red is emphasized or green is emphasized) • This operation is available only when the car is stopped and the parking brake is applied. ● “COLOR”: Adjust the color saturation. • This operation is available only when the car is stopped and the parking brake is applied. 3. Operate the touch key to adjust a level. ● “BRIGHT”: [–] key or [+] key ● “HUE”: [R] key or [G] key ● “COLOR”: [–] key or [+] key 4.
●Lock system monitor image and sound 2 ZONE Rear monitor lock 3 ZONE Image of device connected to the Visual 2 terminal (∗3) or NAVI/RGB terminal.
English VISUAL Operations Switching CONNECT(connect) Owner’s manual Make the following settings when an external device is connected to the VISUAL 2 or NAVI, RGB terminal. CLARION: When Clarion navigation system is connected to the NAVI and RGB terminal. RGB: When a RGB image of other company’s equipment is connected to the RGB terminal. COMPOSITE: When a composite image of other company’s equipment is connected to the NAVI terminal.
Switching disc titles and track titles (MD) This unit can display disc titles and track titles already entered on MDs. Titles up to 256 characters long can be displayed by scrolling the titles. ∗ Titles cannot be entered for MDs with this unit. When the panel is closed: 1. Press the [DISP] button to show the SUB display. The disc title or track title is displayed. 2. Each time you press and hold the [DISP] button for 1 second or longer, the display toggles between the disc title and the track title.
English CD/MD Changer Operations Selecting tracks with the KEY PAD Owner’s manual ∗ This function displays the KEY PAD on the screen and allows you to select and repeat tracks you wish to listen to. Press the [KEY PAD] button to display the KEY PAD. ●Track-down 1. Press the [a] button to move back to the beginning of the current track. 2. Press the [a] button twice to move to the beginning of the previous track.
Other various play functions This function allows you to control a connected DVD changer in the same way as described in DVD player Operation. For details on operations other than those described below, see DVD player Operation. For details on DVD changer precautions, refer to the supplied owner’s manual. Selecting a disc When the panel is closed : Each of the [DIRECT] button corresponds to a disc loaded into the DVD changer. Press the [DIRECT] button (1 to 6) and select the desired disc.
English TV Operations Owner’s manual TV functions Seek tuning When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV requires a TV tuner. 1. Press the [BND] button and select the desired TV band (TV1 or TV2). WARNING For your safety, the driver should not watch the TV or operate the controls while driving. Please note that watching and operating the TV while driving are prohibited by law in some countries.
Recalling a preset station A total of 12 TV stations can be stored (6-TV1 and 6-TV2). This allows you to select your favorite TV stations and store them in memory for later recall. There are 2 ways available to recall the preset station. ●Using the [DIRECT] buton. 1. Press the [BND] button and select the desired TV band. (TV1 or TV2) 2. To recall a stored TV station, press the desired [DIRECT] button to select that station.
English TV Operations Digital Radio/DAB Operations Setting the TV area About DAB programmes ∗ This function is enabled only when the panel is open. Owner’s manual When you select the TV area (TV reception area), the TV tuner area setting changes. 1. Press the [ADJ] button to switch to the ADJUST MODE menu. 2. Touch the [TV] key to select “TV AREA”. Touch the [TV AREA] key to display a list of country name. 3. Touch the “COUNTRY NAME” key to select a desired country. 4.
Selecting stations with the KEY PAD ∗ This function displays the KEY PAD on the screen enabling you to tune in through service scan. ●To perform a service scan, touch the [S.SCN] key. ●To cancel the KEY PAD display, press the [KEY PAD] button or touch the [OFF] key. Manual tuning 1. Press the [FUNC] button to select DAB mode. 2. Press and hold the [BND] button for 1 second or longer. 3. Press the [a] or [d] button to select a station.
English Digital Radio/DAB Operations Owner’s manual ∗ If the reception of the current broadcast station deteriorates, “SEARCH” lights in the display and the radio searches for the same programme on another frequency. ∗ When AF is ON, if the reception of an RDS broadcast deteriorates, the AF indication flickers. ●AF function between RDS and DAB When the same programme is broadcast by both RDS and DAB, and this function is ON, the unit switches automatically to the broadcast with the better reception.
Information select ∗ This function is enabled only when the panel is open. 1. Touch the screen switching touchkey when the STANDARD screen is showing and the STANDARD screen appears. Press the [ADJ] button in the STANDARD screen and touch the [DAB] key, the [INFO SELECT] key appears in the display. 2. Touch the [INFO SELECT] key to select a desired INFORMATION. 3. Touch the [ON] or [OFF] key to select ON or OFF and to set it. 4.
English Digital Radio/DAB Operations Owner’s manual ●Cancelling an emergency broadcast Touch the [DAB MODE] key in the MENU screen and the [AF] key appears in the display. If you touch the [AF] key, emergency broadcast reception is cancelled. Volume setting of TA, emergency broadcast (ALARM), information and PTY The volume for TA, ALARM, information and PTY interrupts can be set during TA, ALARM or PTY interrupts. ∗ The factory default setting is “15”.
NAVI operation When Clarion Navigation (hereinafter referred to as NAVI) is connected, the following functions are enabled: • Showing the NAVI display; • Operation is available by using the panel side buttons. • NAVI guidance sound interruption; • Remote operation of navigation functions by the remote controller through the optic sensor. Changeover between NAVI display and Audio/ Visual (hereinafter referred to as AV) displays.
English Connecting other company’s image equipment Owner’s manual RGB type or composite type images from other company’s equipment can be displayed on this unit Be sure to perform this setting after connecting the RGB type or composite type image equipment to the RGB terminal. 1. When the panel is open, press the [ADJ] button to show the adjustment selection display. 2. Touch the [z] key. Touch the [CONNECT] key to select the following items: 3.
switch between ON and OFF. ON :Auto dimmer function is set. OFF :Auto dimmer function is cancelled. “ ” : Centering “BS” : Backspace “ ” : Space “MEMO” : Memory “z(w)” : Scroll Note: • Up to 10 characters can be input. • To switch the character types, touch the scroll key (z) at the lower left of the display. 6. Touch the [MEMO] key for 2 seconds or longer to store the title into memory and cancel title input mode. 7. Repeat the step 4 to enter the complete title. 1.
English Other Functions Setting the beep Owner’s manual ∗ The sound heard when you make operations is called “beep”. The unit can be set up so that it does not produce this beep sound. ∗ The factory default is “BEEP ON”. 1. When the panel is open, press the [ADJ] button to select the ADJUST MODE menu. 2. Touch the [ ] key to select “BEEP”. Touch the [BEEP] key to select “ON” and “OFF”. 3. Touch the [ON] or [OFF] key to select a desired mode and set it. 4.
Setting the Auto Panel ∗ The factory default setting is “OFF”. 1. Press the [ADJ] button to select the ADJUST MODE menu. 2. Touch the [ ] key to select “AUTO PANEL”. Touch the [AUTO PANEL] key. 3. Touch the [ON], [OFF] or [CLOSE] key to set it. ON: The liquid crystal panel houses automatically after turning off the power, removing the DCP. And the liquid crystal panel open automatically after turning on the power, attaching the DCP. OFF: Normal operation.
English 5.1 ch Surround Decoder Operations 5.1 ch Surround Decoder control function Owner’s manual This function is available when a 5.1 ch Surround Decoder (DVH923) is connected. When the 5.1 ch Surround Decoder (DVH923, sold separately) is CeNET connected, the 5.1 ch Surround Decoder Control unit (DVC923, sold separately) cannot be used. This section describes operation procedures only. For other details, refer to the owner’s manual supplied with the 5.1 ch Surround Decoder.
●SPEAKER GAIN This function sets speaker output level. 3-1. Touch the [SPEAKER GAIN] key to show the submenu. 3-2. Touch the [FRONT L], [CENTER], [FRONT R], [SURROUND R], [SURROUND L] or [SUB WOOFER] key to set respective item. 3-3. Touch the [w] or [z] key to make adjustments in the range -10 dB to +10 dB in 1 dB step increments. The default value is “0 dB”. ●DELAY This function adjusts the timing of the speakers so that they are synchronized with front speaker output.
English 5.1 ch Surround Decoder Operations Owner’s manual DSF mode ●SIGNAL DSF effect ON/OFF This function selects [P. NOISE] or [MUSIC]. ●SPEAKER SELECT 1. Press the [A-M] button. 2. Touch the [STATUS] key to select “ON” and “OFF”. 3. Each time the [ON/OFF] key is touched, the on and off statuses are switched alternately. 4. After the setting, press the [A-M] button again or touch the [RTN] key to return to the STANDARD screen.
Problem Cause English 11. IN CASE OF DIFFICULTY Measure Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. Nothing happens when buttons are pressed. The microprocessor has malfunctioned due to noise, etc. Turn off the power, then press the [RELEASE] lever and remove the DCP. Press the reset button both of tuner amp unit and main unit for about 2 seconds with a thin rod.
English Problem TV Owner’s manual 68 Cause Measure The image is not displayed. The parking brake is not pulled. Check that the parking brake is applied. The display is dark. The brightness control is too low. Adjust the brightness properly. The operating condition is not good. The temperature inside the vehicle may be 0˚C or less. Set to an appropriate temperature (25˚C or so) and check it again. The headlight of the vehicle is lit.
CD CHANGER MD CHANGER Measure ERROR 2 A CD is caught inside the CD deck and is not ejected. This is a failure of CD deck’s mechanism and consult your store of purchase. ERROR 3 A CD cannot be played due to scratches, etc. Replace with a non-scratched, non-warped-disc. ERROR 6 A CD is loaded upside-down inside the CD Eject the disc then reload it properly. deck and does not play. ERROR 2 A CD inside the CD changer is not loaded.
Drive method: TFT (thin-film transistor) active matrix driving Pixels: 336,960 (1440 × 234) AM Tuner General Frequency Range: MW: 531 kHz to 1602 kHz (9 kHz steps) LW:153 kHz to 279 kHz (3 kHz steps) Power source voltage: 14.4 V DC (10.8 to 15.6 V allowable) Ground: Negative Current consumption: 4.0 A (1 W) Auto Antenna Rated Current: 500 mA less Dimensions of the Main Unit: 178 mm width × 50 mm Height × 165 mm Depth Dimensions of the Tuner Amp Unit: 178 mm width × 37.5 mm Height × 209.
