Owner’s manual & Installation manual Mode d’emploi et manuel d’installation Manual de instrucciones y de instalación VRX775VD 2006/12 (Y-YI) *VRX775VD(001-cover)E All Rights Reserved.Copyright © 2006: Clarion Co., Ltd. Printed in China / Imprimé en Chine / Impreso en China 1 QC-6824B 280-8483-00 VRX775VD Clarion Co., Ltd.
Eng.book Page 2 Wednesday, December 6, 2006 1:51 PM Thank you for purchasing the Clarion VRX775VD. English * * * * * Owner’s manual This owner’s manual is for the VRX775VD. Please read this manual thoroughly before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual.
ori.fm Page 4 Wednesday, November 22, 2006 3:27 PM TUNER mode operation Expanding Systems (Preset List screen) Expanding audio features •Enters desired frequency. 1 0 Satellite Radio 7 9 ENT Expanding visual features CeNET DVD Changer CeNET CD Changer (DCZ625/CDC655Tz) iPod Note: ∗1:These images indicate the buttons to press or keys to touch. ∗2:External equipment not connected with CeNET is not displayed. ∗3:This shows an example entering 107.9 MHz. VTR etc. 5.
ori.fm Page 5 Wednesday, November 22, 2006 3:27 PM [MENU] Names of Buttons Note: • Be sure to read this chapter while referring to the front diagrams for chapter “3.CONTROLS” on page 5 (unfold). [E], [e] buttons • Use these buttons to increase/decrease the volume. Español [p] button • Press this button to enter the play pause mode in the DVD PLAYER/iPod/changer modes. Press the button again to resume playback.
ori.fm Page 5 Wednesday, November 22, 2006 3:27 PM [MENU] Names of Buttons Note: • Be sure to read this chapter while referring to the front diagrams for chapter “3.CONTROLS” on page 5 (unfold). [E], [e] buttons • Use these buttons to increase/decrease the volume. Español [p] button • Press this button to enter the play pause mode in the DVD PLAYER/iPod/changer modes. Press the button again to resume playback.
ori.fm Page 4 Wednesday, November 22, 2006 3:27 PM TUNER mode operation Expanding Systems (Preset List screen) Expanding audio features •Enters desired frequency. 1 0 Satellite Radio 7 9 ENT Expanding visual features CeNET DVD Changer CeNET CD Changer (DCZ625/CDC655Tz) iPod Note: ∗1:These images indicate the buttons to press or keys to touch. ∗2:External equipment not connected with CeNET is not displayed. ∗3:This shows an example entering 107.9 MHz. VTR etc. 5.
Eng.book Page 9 Wednesday, December 6, 2006 1:51 PM DVD Video mode operation English (DVD PLAYER mode screen)∗4 (Source menu) Owner’s manual ∗Screen during DVD mode when automobile moving. (Option menu) (DVD SETUP menu) Note: ∗4:When displaying movies in DVD video mode, touching the screen surface will cause the DVD PLAYER mode screen to be displayed.
Eng.book Page 10 Wednesday, December 6, 2006 1:51 PM Adjusting audio feature settings English ●When no surround decoder is connected Owner’s manual (ADJUST mode menu) (AUDIO menu) (AUDIO EXT.
Eng.book Page 11 Wednesday, December 6, 2006 1:51 PM English ●When the 5.1 ch Surround Decoder is connected Owner’s manual (ADJUST mode menu) (AUDIO menu) (AUDIO EXT.
Eng.book Page 12 Wednesday, December 6, 2006 1:51 PM Adjusting the other system settings English (GENERAL menu) Owner’s manual (ADJUST mode menu) (CLOCK screen) (MONITOR menu) (Hour, Minute, a.m./p.m.) (MONITOR ADJ) (Monitor Adjust screen) Bright Color Hue (WALL COLOR screen) Dimmer •Switched by touching this key repeatedly.
Eng.book Page 13 Wednesday, December 6, 2006 1:51 PM English 6. REMOTE CONTROL Remote control unit Owner’s manual Signal transmitter Operating range: 30˚ in all directions [BAND] [MUTE] [SRC] [VOLUME] [P.TIME] [0-9] [DISC SEL] [ ],[ ] [SEARCH MODE] [MENU] [RTN] [TOP MENU] [SET UP] [ENT] [ ],[ ] [ISR] [2-ZONE] [RPT] [SCN] [PBC] [RDM] [AUDIO] [SLOW] [ANGLE] [SUB TITLE] Inserting the Batteries 1. Slide the rear cover in the direction of the arrow, and remove it. 2.
Eng.book Page 14 Wednesday, December 6, 2006 1:51 PM English Functions of Remote Control Unit Buttons You can use the remote control unit to control the VRX775VD. When the 2-ZONE function is ON, the controls work upon the selected zone. Note: • The steering wheel remote control operations work upon the MAIN zone even when the SUB zone is selected. Owner’s manual Shared modes [SRC] button • Press this button to turn on the power. Keep pressing this button more than 1 second to turn off the power.
Eng.book Page 15 Wednesday, December 6, 2006 1:51 PM Functions of Remote Control Unit Buttons [MENU] button • Press to display menu stored on video disc. [SET UP] button • Press to show the DVD SETUP menu screen during DVD video playback. [TOP MENU] button • Press to display the Top Menu screen stored on DVD video disc. Some discs do not display the top menu screen. [E], [e], [T], [t] buttons • Press to select button items on the menu screen of a DVD video.
Eng.book Page 16 Wednesday, December 6, 2006 1:51 PM Functions of Remote Control Unit Buttons English Owner’s manual [0 - 9] buttons • Press to enter track numbers in the Key Pad screen. • Press to select the disc number in the Disc List screen. [E], [e] buttons • Press to scroll the Disc/Track List screen. [r], [f] buttons • Press to select the next higher or lower track numbers. • Keep pressing to perform fast-forward or fastbackward. [RPT] button • Press to perform track repeat.
Eng.book Page 17 Wednesday, December 6, 2006 1:51 PM Attaching the DCP 1. Hook the right side of the DCP to the right side of the main unit. 2. Settle the left side of the DCP to the main unit. We recommend taking the DCP with you when leaving the car. Removing the DCP 1. Keep pressing the [SRC] button more than 1 second to turn off the power. Magnet CAUTION CAUTION [SRC] button 2. Pull the left side of the DCP toward you, and remove it. • This unit uses a magnet to fix the DCP.
Eng.book Page 18 Wednesday, December 6, 2006 1:51 PM English 8. CAUTIONS ON HANDLING Liquid crystal panel/Generalities Owner’s manual For a longer service life, be sure to read the following cautions. • Be sure to house the liquid crystal panel inside the main unit when parking the car outdoors for long period of time. The liquid crystal panel will operate properly in a temperature range of 0 to 60°C. • Do not allow any liquids on the set from drinks, umbrellas etc.
Eng.book Page 19 Wednesday, December 6, 2006 1:51 PM Storage • New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc. • Do not expose discs to direct sunlight or any heat source. • Do not expose discs to excess humidity or dust. • Do not expose discs to direct heat from heaters.
Eng.book Page 20 Wednesday, December 6, 2006 1:51 PM English 9. DVD VIDEO SYSTEM DVD video is a high-quality digital video source that provides crisp and clear images. One 12 cm disc contains either one film or four hours of music. Owner’s manual DVD Video Features This unit provides the following functions in addition to the high image quality and sound quality of DVD video. Note: • The functions described in this section, for example, the recorded language, subtitles, angles, etc.
Eng.book Page 21 Wednesday, December 6, 2006 1:51 PM Discs that cannot be played back This DVD video player can play the following discs. This DVD video player cannot play back DVDAudio, DVD-RAM, Photo CDs, etc. Playable discs DVD video discs video CDs CD TEXT Audio CDs MP3 ID3 TAG WMA About CD Extra discs Note: • It may also not be possible to play back CDs recorded on a CD-R unit and CD-RW unit. (Cause: disc characteristics, cracks, dust/dirt, dust/dirt on player’s lens, etc.
Eng.book Page 22 Wednesday, December 6, 2006 1:51 PM English 10.OPERATIONS Basic Operations Owner’s manual Note: • Be sure to read this chapter referring to the chapter “3. CONTROLS” (page 5). CAUTION CAUTION When the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may harm your hearings. Be careful about adjusting the volume. Turning on and off the power Note: • Start the engine before using this unit.
Eng.book Page 23 Wednesday, December 6, 2006 1:51 PM Basic Operations 1. Press the [P] (OPEN) button. The liquid crystal panel comes out and stands up automatically. The power of this unit will be turned on. CAUTION CAUTION While driving, keep the volume level at which external sounds can be heard. Mute 1. When in the TUNER, Satellite Radio, VISUAL or TV mode, press the [p] button to turn the mute on and off.
Eng.book Page 24 Wednesday, December 6, 2006 1:51 PM Basic Operations English Adjusting the angle of the liquid crystal panel Owner’s manual The angle of the liquid crystal panel can be adjusted depending on the mounting angle of the unit or light coming into the car. 1. Turn the power on. When the liquid crystal panel is closed, press the [P] (OPEN) button. 2.
Eng.book Page 25 Wednesday, December 6, 2006 1:51 PM Basic Operations Adjusting the MID 2-1. Touch the []] key of the BAL/FAD item. The MID gain, MID frequency (center frequency) and MID Q can be adjusted as follows. [{]: Emphasizes the sound from the front speakers. [}]: Emphasizes the sound from the rear speakers. 3-2. Touch the [[] or []] key to adjust to the balance level. • The factory default setting is “0”. (Adjustment range: left 13 to right 13) [[]: Emphasizes the sound from the left speakers.
Eng.book Page 26 Wednesday, December 6, 2006 1:51 PM Basic Operations English Adjusting the MONITOR 1. Press the [ADJ] button, then touch the [MONITOR] key. Owner’s manual * The [ADJ] buttons is enabled only when the panel is open. Adjusting the brightness, color, hue and dimmer level Note: • The Color and Hue settings can be adjusted only in the DVD video, Video CD, TV/VTR, VISUAL and DVD changer modes, and only when the car is stopped and the parking brake is applied.
Eng.book Page 27 Wednesday, December 6, 2006 1:51 PM Basic Operations Adjusting the GENERAL 1. Press the [ADJ] button, then touch the [GENERAL] key. * The [ADJ] buttons is enabled only when the panel is open. 2-1. Touch the [ON] or [OFF] key of the CAMERA WARNING item to turn this function on or off (The factory default setting is “ON”). Switching the VTR system between NTSC and PAL Note: • This setting is applied only to the VISUAL/VTR input mode. 2-1.
Eng.book Page 28 Wednesday, December 6, 2006 1:51 PM Basic Operations English Performing the system check Owner’s manual 3-1. Touch the []] key of the SYSTEM CHECK item. The available operation mode is listed in white letters. 3-2. Touch [Check] key at the top right of the screen to perform the system check manually. The system will be restarted after performing the system check.
Eng.book Page 29 Wednesday, December 6, 2006 1:51 PM Basic Operations 3-1. Touch the [C] key to display the next menu screen. Adjusting the CLOCK Note: • This setting is disabled when the Navigation system is connected. The clock is automatically adjusted using the CT (clock time) data in the GPS data. 1. Press the [ADJ] button, then touch the [CLOCK] key. 3-2. Touch the [ON], [OFF] or [CLOSE] key of the AUTO PANEL item to set to “ON”, “OFF” or “CLOSE”.
Eng.book Page 30 Wednesday, December 6, 2006 1:51 PM Basic Operations English 2-ZONE Function Setting the 2-ZONE function • The factory default setting is “OFF”. About the 2-ZONE function Owner’s manual The 2-ZONE function is a function that outputs separate sounds/images from the MAIN zone and SUB zone (such as the optional rear monitor) by simultaneously operating two sources in the one center unit. Thereby, plural listeners are allowed to enjoy separate audio/visual sources.
Eng.book Page 31 Wednesday, December 6, 2006 1:51 PM Basic Operations English Monitor image and sound with 2-ZONE ON/OFF ●With 2-ZONE function OFF Front monitor lock ON Front monitor lock OFF Visual connection [NAVI] (*1) Visual connection [OTHER] (*1) Visual connection [NAVI] (*1) Front monitor (liquid crystal panel) Displays image of device connected to the Visual terminal. (*3) Displays image of device connected to the Visual terminal. Displays image of mode selected from the Source menu.
Eng.book Page 32 Wednesday, December 6, 2006 1:51 PM English Radio Operations Listening to the radio Owner’s manual 1. Press the [SRC] button, and touch the [TUNER] key. The TUNER mode screen is displayed. 2. Press the [BAND] button or touch the [Band] key to select the radio band. Each time the button is pressed, the radio reception band changes in the following order: FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1... 3. Press the [R] or [F] button to tune in the previous or next preset station. Seek tuning 1.
Eng.book Page 33 Wednesday, December 6, 2006 1:51 PM Radio Operations The Auto Store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position. 1. Touch the [Band] key to select the desired band. (FM or AM) 2. Touch the [List] key. 3. Touch and hold the [AS] key for more than 2 seconds.
Eng.book Page 34 Wednesday, December 6, 2006 1:51 PM English DVD Video Player Operations Changing DVD System Settings Owner’s manual Note: • If the Setup operation is performed in the middle of DVD video play, the disc will restart from beginning. • The settings on the DVD SETUP menu cannot be set with the remote control unit. Selecting the DVD SETUP menu 1. Press the [SRC] button, and touch the [DVD PLAYER] key. The DVD PLAYER mode screen is displayed. 2.
Eng.book Page 35 Wednesday, December 6, 2006 1:51 PM DVD Video Player Operations 4-2. Touch the key to select a desired language to set it. • The factory default setting is “ENGLISH”. Setting up the audio language 4-1. Touch the []] key of AUDIO LANGUAGE item. The AUDIO LANGUAGE menu is displayed. Set up the country number for setting up of the parental level. 4-1. Touch the []] key of PARENTAL LOCALE item. The PARENTAL LOCALE screen is displayed. 4-2.
Eng.book Page 36 Wednesday, December 6, 2006 1:51 PM DVD Video Player Operations English The relationship between DVD video category codes and parental level are shown in the table below. Use this table when setting the parental level.
Eng.book Page 37 Wednesday, December 6, 2006 1:51 PM DVD Video Player Operations Watching a DVD-Video You can select the button items displayed in the DVD menu by directly touching it. If the button items are hard to select correctly, you can also operate them by displaying Key Pad on the screen. After disc loading, the play mode is automatically engaged. • When playback is not started, press the [p] button or touch the [p] key. • Button operation may differ depending on the story of the disc.
Eng.book Page 38 Wednesday, December 6, 2006 1:51 PM DVD Video Player Operations English Owner’s manual Stopping playback Skipping a chapter (searching) 1. Showing the DVD PLAYER mode screen, touch and hold the [p] key for more than 1 second during playback. Playback is stopped. 2. To resume playback, press the [p] button. Playback resumes from the scene where playback is stopped. ●About chapter Chapter means a small segment to divide the data area of the disc. 1.
Eng.book Page 39 Wednesday, December 6, 2006 1:51 PM DVD Video Player Operations * If the input title/chapter number does not exist or searching with a title/chapter number is not allowed, the screen image will not change. 4. Touch the [Back] key. Scan playback Scans and plays back all chapters recorded on the DVD-Video, the first 10 seconds for each. 1. Showing the DVD PLAYER mode screen, touch the [Option] key. 2. Touch the [Chapter Scan] key, then touch the [Back] key. The message “C.
Eng.book Page 40 Wednesday, December 6, 2006 1:51 PM DVD Video Player Operations English Owner’s manual Switching among languages Switching angles On discs in which two or more audios or audio languages have been recorded, you can switch among the audio languages during playback. 1. Showing the DVD PLAYER mode screen, touch the [Option] key. 2. Touch the [Audio] key during playback. • Each time you touch the key, you can switch among audio languages. • It may take time to switch among audios.
Eng.book Page 41 Wednesday, December 6, 2006 1:51 PM DVD Video Player Operations Note: • There are two types of Video CDs, and these differ in some operations and functions. For the operations and functions of a Video CD, see the documents attached to the Video CD. Showing the V-CD menu (for Video CD discs with PBC) * This key does not function on some discs. 1. Touch the screen to display the VIDEO CD mode screen, then touch the [Menu] key during playback. The Video CD menu appears.
Eng.book Page 42 Wednesday, December 6, 2006 1:51 PM DVD Video Player Operations English Owner’s manual Searching with a track number On/Off of Playback Control This operation allows searching with the track numbers recorded on the video CDs. 1. Touch the screen to display the VIDEO CD mode screen. 2. Touch the [Search] key. 3. Input the track number that you want to play back with [0] to [9] key. 4. Touch the [ENT] key. Playback starts from the scene of the input track number.
Eng.book Page 43 Wednesday, December 6, 2006 1:51 PM DVD Video Player Operations 1. Touch the [Option] key. Owner’s manual Other various play functions The TOP function resets the DVD player to the first track of the disc. 1. Press the [BAND] button to play back the first track (track No. 1). English TOP function Fast forward and fast backward 1. Press and hold the [R] or [F] button during playback. The playback speed becomes 5-time faster first and then 20-time faster 3 seconds later.
Eng.book Page 44 Wednesday, December 6, 2006 1:51 PM DVD Video Player Operations English Listening to an MP3/WMA Owner’s manual This unit is an ID3 Tag compatible model. This unit supports the ID3 TAGs of the Version 2.4, 2.3, 1.1 and 1.0. In displaying, this unit gives priority to the Version 2.3 and 2.4 TAGs. After disc loading, the play mode is automatically engaged. What is MP3/WMA? MP3 is an audio compression method and classified into audio layer 3 of MPEG standards.
Eng.book Page 45 Wednesday, December 6, 2006 1:51 PM DVD Video Player Operations 1. Press the [BAND] button during playback. The tracks of the current folder are skipped and playback starts from the first track of the next folder. Selecting a folder/track on the LIST screen 1 2 1 3 4 2 4 3 Pausing playback 1. Press the [p] button or touch the [p] key during playback. Playback pauses. 2. To resume playback, press the [p] button or touch the [p] key again. Playback resumes.
Eng.book Page 46 Wednesday, December 6, 2006 1:51 PM DVD Video Player Operations English Displaying CD titles 1. Touch the [Option] key. 1. Touch the [Title] key. 2. Touch the [X] key of the Folder, Track, Album, Artist or Title item to cause the respective display to scroll once. Owner’s manual Other various play functions 2. Touch the touch key of the function you want to play.
Eng.book Page 47 Wednesday, December 6, 2006 1:51 PM Title list play Titles up to 10 characters long can be stored in memory and displayed for Radio stations, CD, TV stations, and CDs in the CD changer. The numbers of titles that can be entered for each mode are as follows. You can display a list of titles, then select the CD track, disc or broadcast station to listen to from that list.
Eng.book Page 48 Wednesday, December 6, 2006 1:51 PM Other Functions English Owner’s manual Changing over monitor display size Internal amplifier cancel function • The factory default setting is “[F.WIDE]”. This function is used to disable the internal amplifier when an external amplifier is connected. • The factory default setting is “OFF”. 1. Press the [ADJ] button. 2. Touch the [AUDIO EXT.] key. 3. Touch the [ON] or [OFF] of the AMP CANCEL item to turn the internal amplifier on or off. 4.
Eng.book Page 49 Wednesday, December 6, 2006 1:51 PM English 11.OPERATIONS OF ACCESSORIES iPod Operations Note: • Note that iPod versions higher than those noted above may not be playable. • The unit will not operate, or may operate improperly with unsupported versions. • First, second and third generation iPod and iPod shuffle cannot be used. Controlling the iPod ●Selecting the iPod mode 1. Connect the iPod to the connector. 2. Press the [iPod] button.
Eng.book Page 50 Wednesday, December 6, 2006 1:51 PM iPod Operations English Owner’s manual [p] key • Use to control playback and pause. [R], [F] keys • Use to perform track selection. Touch and hold to enable fast-forward or fastbackward. Note: • The title display (*) shows, from top level down, the SONG title, ARTIST name, and ALBUM title. Press the operation display to scroll the SONG title. ●Operation display Play/Pause icon(p) display Track No.
Eng.book Page 51 Wednesday, December 6, 2006 1:51 PM iPod Operations TOP function The TOP function resets the player to play the first track of the tracks. 1. Press the [BAND] button to play back the first track of the current list. Note: • Do not connect the iPod to this unit when a Video Playlists item is selected on the iPod. * To play back all of the tracks in the Songs list from the first track, keep pressing the [BAND] button more than 1 second. Selecting a list item from a list screen 1.
Eng.book Page 52 Wednesday, December 6, 2006 1:51 PM English VISUAL Operations This function is available when a VTR, etc. is connected to the visual terminal. WARNING Owner’s manual For your safety, the driver should not watch the VTR, etc. or operate the controls while driving. Please note that watching and operating the VTR, etc. while driving are prohibited by law in some countries.
Eng.book Page 53 Wednesday, December 6, 2006 1:51 PM CD Changer Operations English Switching to a next disc (Disc Up function) Other various play functions 1. Touch the [Option] key. Owner’s manual The disc up function plays from the first track (track No.1) of the next disc. 1. Press the [BAND] button. The disc changes to the next disc. Searching with a track number * This function is available only for the current disc. 1. Touch the [Search] key. 2.
Eng.book Page 54 Wednesday, December 6, 2006 1:51 PM English DVD Changer Operations Owner’s manual Only basic operations of DVD changer can be performed from the unit. Use the remote control unit to perform the following functions. • Scan, Repeat, Random functions • Video CD Playback function ON/OFF • DVD Setup function, Audio, Subtitle, Angle setting function For details on operations other than those described below, see the pages of “DVD Video Player Operations” (page 34).
Eng.book Page 55 Wednesday, December 6, 2006 1:51 PM TV Operations A total of 12 TV stations can be stored (6-TV1 and 6-TV2). There are 2 ways available to recall the preset station. ●Using the [R] or [F] button 1. Press the [BAND] button or touch the [Band] key to select the desired TV band. (TV1 or TV2) 2. Press the [R] or [F] button to recall a stored TV station. ●Using the Preset List screen 1. Touch the screen to display the menu, then touch the [List] key. 2.
Eng.book Page 56 Wednesday, December 6, 2006 1:51 PM TV Operations English Preset scan Owner’s manual Preset scan shows each preset channel before it automatically advances to the next preset. This function is useful for searching for desired TV station in memory. 1. Touch the screen to display the TV/VTR mode menu, then touch the [List] key. 2. Touch the [PS] key to start preset scan. The unit starts scanning each station for 7 seconds sequentially. 3.
Eng.book Page 57 Wednesday, December 6, 2006 1:51 PM Note: • When the function is differ depending to the connected receiver, they are distinguished by the following notations: “XM”: for an XM Satellite Radio Receiver “SIRIUS”: for a SIRIUS Satellite Radio Receiver Selecting a Satellite Radio mode 1. Press the [SRC] button, and touch the [SIRIUS] or [XM] key. The system changes to the specified Satellite Radio mode. Confirming your Radio ID ●XM 1. Touch the [Search] key to display the Key Pad screen. 2.
Eng.book Page 58 Wednesday, December 6, 2006 1:51 PM Satellite Radio Operations English Selecting a station with the channel number Owner’s manual 1. Touch the [Search] key. 2. Enter the channel number of your desired station by touching the [0] to [9] keys. If you enter a wrong number, you can cancel it by touching the [CLR] key. 3. Touch the [ENT] key. The radio channel you entered will be tuned. 4. Touch the [Back] key.
Eng.book Page 59 Wednesday, December 6, 2006 1:51 PM Satellite Radio Operations English Presetting a category Owner’s manual A category can be preset by registering specific categories in Category Preset keys 1 to 6. Then the desired category can be recalled by pressing the corresponding Category Preset keys. 1. Touch the [CAT] key. 2. Touch the [v] or [V] key to scroll the category list. 3. Touch the Category item key you wish to store in memory. 4.
Eng.book Page 60 Wednesday, December 6, 2006 1:51 PM English NAVI Operations NAVI functions ●AV screen Owner’s manual Note: • Hereafter in this section, the Navigation system will be called as “NAVI”.
Eng.book Page 61 Wednesday, December 6, 2006 1:51 PM NAVI Operations English Connecting Other Company’s Image Equipment Owner’s manual The composite type images from the other company’s equipment can be displayed on this unit. Be sure to perform this setting after connecting the composite type image equipment to the Visual terminal. 1. Press the [ADJ] button, and touch the [GENERAL] key. 2. Touch the [C] key to display the next menu screen. 3.
Eng.book Page 62 Wednesday, December 6, 2006 1:51 PM English 5.1 ch Surround Decoder Operations Owner’s manual This function is available when an optional 5.1 ch Surround Decoder (DVH940N) is connected. When the 5.1 ch Surround Decoder is connected through the CeNET cable, the 5.1 ch Surround Decoder Control unit (DVC920, optional) cannot be used. ●SPEAKER SEL (speaker selection) This function determines center speaker, surround speaker and subwoofer connection. 3-1.
Eng.book Page 63 Wednesday, December 6, 2006 1:51 PM 5.1 ch Surround Decoder Operations 3-1. Touch the []] key of the FILTER item to show the submenu. 3-2. Touch the [[] or []] key of the FRONT HPF, CENTER HPF, SURROUND HPF or SUBWOOFER LPF item to adjust. [FRONT HPF]: This function can be set to the following four settings: 50 Hz, 80 Hz, 120 Hz or THRGH (through). “THRGH” is the default value. [CENTER HPF]: This function can be set to the following three settings: 50 Hz, 80 Hz and 120 Hz.
Eng.book Page 64 Wednesday, December 6, 2006 1:51 PM 5.1 ch Surround Decoder Operations English DSF mode DSF effect ON/OFF Owner’s manual • The factory default setting is “OFF”. 1. Press the [ADJ] button, and touch the [AUDIO] key. 2. Touch the []] key of the STATUS item. 3. Touch the [ON] or [OFF] key of the DSF item to turn the function ON or OFF. 4. Touch the [Back] key to return to the previous screen.
Eng.book Page 65 Wednesday, December 6, 2006 1:51 PM 5.1 ch Surround Decoder Operations • The factory default setting is “OFF”. 1. Press the [ADJ] button, and touch the [AUDIO] key. 2. Touch the []] key of the Dolby PLII item. 3. Touch the key for the desirable type to select. 4. Touch the [Back] key to return to the previous screen. 3-1. Touch the []] key of the BAL/FAD item. Touch the [{] or [}] key to adjust the fader level. [{] key: Emphasizes the sound from the front speakers.
Eng.book Page 66 Wednesday, December 6, 2006 1:51 PM English 12.IN CASE OF DIFFICULTY GENERAL Owner’s manual Problem Cause Measure Power does not turn on. (No sound is produced.) Fuse is blown. Incorrect wiring. Consult your store of purchase. Nothing happens when buttons are pressed. The microprocessor has malfunctioned due to noise, etc. Turn off the power and remove the DCP. Press the reset button with a thin rod. Display is not accurate. Replace with a fuse of the same amperage.
Eng.book Page 67 Wednesday, December 6, 2006 1:51 PM TV/VTR (When connecting an optional TV tuner, etc.) Cause English Problem Measure The parking brake is not engaged. Check that the parking brake is engaged. The display is dark. The brightness control is too low. Adjust the brightness properly. The operating condition is not good. The temperature inside the vehicle may be 0°C or lower. Set to an appropriate temperature (25°C or so) and check it again.
Eng.book Page 68 Wednesday, December 6, 2006 1:51 PM English 13.ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to solve the problem. Owner’s manual DVD Player Display Cause Measure ERROR 2 A disc is caught inside the This is a failure of DVD deck’s mechanism and CD deck and is not ejected. consult your store of purchase. ERROR 3 A disc cannot be played due to scratches, etc. Replace with a non-scratched, non-warped disc.
Eng.book Page 69 Wednesday, December 6, 2006 1:51 PM English 14.SPECIFICATIONS LCD Monitor Frequency Range: 87.9 MHz to 107.
Eng.book Page 70 Wednesday, December 6, 2006 1:51 PM English INSTALLATION AND WIRE CONNECTION MANUAL INSTALLATION MANUAL ■ Contents 1. BEFORE STARTING........................................................................................................................70 2. PACKAGE CONTENTS....................................................................................................................70 3. GENERAL CAUTIONS .............................................................................
Eng.book Page 71 Wednesday, December 6, 2006 1:51 PM 5. Use the included screws for installation. Using other screws can cause damage. (Figure 4) Chassis Damage Max. 8 mm (M5 screw) Figure 4 6. The source unit has mounting screw holes for NISSAN (N marks) and TOYOTA (T marks) vehicles. (Figure 5) Dashboard T Gearshift lever (check that it does not touch the LCD.) Chassis INSTALLATION MANUAL 1. Prepare all articles necessary for installing the main unit before starting. 2.
Eng.book Page 72 Wednesday, December 6, 2006 1:51 PM Universal Mount INSTALLATION MANUAL Note: *1: Some car models require special mounting kits for proper installation. Consult your Clarion dealer for details. *2: Fasten the front stopper securely to prevent the main unit from coming loose. 1. Place the universal mounting bracket into the instrument panel, use a screwdriver to bend each stopper of the universal mounting bracket inward, then secure the stopper as shown in Figure 6. 2.
Eng.book Page 73 Wednesday, December 6, 2006 1:51 PM Fixed Mount (TOYOTA, NISSAN and other ISO/DIN equipped vehicles) 2-Screw Engaging claw Main Unit 2-Spring Screwdriver Figure 7 4-Hexagonal screw ∗ (M5 × 8) Mounting bracket (1 pair for the left and right sides) Main Unit Pocket Note 2 Center Panel (Note 1) ∗: The screws with this mark are enclosed in this set. ★: The parts and screws with this mark are used to install radio or included in the installation kit.
Eng.book Page 74 Wednesday, December 6, 2006 1:51 PM English 6. REMOVING THE MAIN UNIT INSTALLATION MANUAL 1. When the rear of the main unit has been secured with the method shown in Figure 6 unfasten the special screw. 2. Remove the outer escutcheon. 3. Insert the hook plate between the spring and the universal mounting bracket, fit tab B of the spring into hole A of the hook plate, then pull the main unit out by the hook plate. (Insert both the right and left edges of the hook plate.
Eng.book Page 75 Wednesday, December 6, 2006 1:51 PM English 8. WIRE CONNECTION Note: • Before installing, be sure to disconnect the negative cable of the car battery. • In the optional devices, the RCA Pin and the Connector cable are separately-sold items.
Eng.
Eng.book Page 77 Wednesday, December 6, 2006 1:51 PM Parking brake lamp + cord to battery ●How to attach the electro-tap 1. Place the Parking brake cord at the stopper, and fold it back in the direction of the arrow. Parking brake Electro-tap Parking brake signal cord 2. Pass the Parking brake signal cord through, and fold it back in the direction of the arrow.
Eng.book Page 78 Wednesday, December 6, 2006 1:51 PM English 9.
Owner’s manual & Installation manual Mode d’emploi et manuel d’installation Manual de instrucciones y de instalación VRX775VD 2006/12 (Y-YI) *VRX775VD(001-cover)E All Rights Reserved.Copyright © 2006: Clarion Co., Ltd. Printed in China / Imprimé en Chine / Impreso en China 1 QC-6824B 280-8483-00 VRX775VD Clarion Co., Ltd.
