Service manual

VRX765VD
VRX766VD
- 4 -
SYSTEM CONNCTION
VRX765VD/VRX766VD
CeNET
SLAVE
STAND
ALONE
(VCZ625)
(DVH940)
(TTX7501z/TTX7504z)
(SRK5)
(SRV303)
(DCZ625)
TV Tuner
CeNET cable
(included
the TV tuner)
RCA video cable
(included the TV tuner)
CeNET DVD Changer
5.1 ch Surround
Decoder
CeNET cable
(included the
DVH940)
Front
Speakers
4-Channel
Amplifier
Rear
Speakers
Center speaker
built-in amplifier
Powered sub-woofer
built-in amplifier
(Black)
Digital optical fiber cable (included the DVH940)
RCA cable
(sold separately)
RCA cable
(sold separately)
RCA cable (sold separately)
Digital optical fiber cable
(
DCA-005/008 , sold separately)
Set the [SLAVE/STAND ALONE]
switch to the [SLAVE] position.
Set the [CeNET/STAND ALONE] switch
to the [CeNET] position.
(Gray)
(Gray)
RCA video cable (included the VCZ625)
Ferrite clamp
(Included the
DVD changer)
RCA cable
(included
the DVH940)
Red
White
Non fader
output
CeNET Cable
(included the Changer)
Satellite Radio
Receiver
CeNET cable
(included the SIRIUS)
*XM ; sold separately
CeNET Y-adapter
(CCA-519-601,
sold separately)
CeNET CD Changer
Video
Selector
Yellow
Purple
STAND
ALONE
ERROR DISPLAYS
If an error occurs,one of the following displays is displayed.Take the measures described below to eliminate the problem.
DVD
player
CD
changer
Error display
ERROR 2
ERROR 3
ERROR 6
ERROR 2
ERROR 3
ERROR 6
Cause
A CD is caught inside the CD deck and
is not ejected.
A CD cannot be played due to
scratches,etc.
A CD is loaded upside-down inside the
CD deck and does not play.
A CD inside the CD changer is not
loaded.
A CD inside the CD changer cannot be
played due to scratches,etc.
A CD inside the CD changer cannot be
played because it is loaded upside-down.
Measure
This is a failure of CD deck's mechanism
and cinsolt your store of purchase.
Replace with a non-scratched,non-
warped disc.
Eject the disc then reload it properly.
This is a failure of CD changer's mecha-
nism.
Replace with a non-scratched,non-
warped disc.
Eject the disc then reload it properly.
Note:If an error display other than the ones described above appears, press the reset button.
* When the reset button is pressed,frequencies of TV/radio stations,titles,etc. stored in memory are cleared.