Owner’s manual & Installation manual 使用說明書和安裝說明書 사용 설명 및 설치 설명서 VRX746VD AM/FM DVD VIDEO / VIDEO CD / CD / MP3 PLAYER / CD CHANGER CONTROLLER WITH 7" LC DISPLAY 調頻 (FM)DVD 帶７英寸液晶顯示器調 幅 (AM)/ 帶７英寸液晶顯示器調幅 (AM)/調 換片機 CD/CD/MP3播放機 CD換片機 VIDEO/VIDEO CD/CD/MP3 播放機 / CD 控制器 7인치 LC 디스플레이 화면의 AM/FM DVD 비디오/비디오 CD/CD/MP3 플레 이어 / CD 체인저 컨트롤러 R Clarion Co., Ltd. All Rights Reserved. Copyright © 2004: Clarion Co., Ltd. Printed in Japan/ 在曰本印刷/일본에서 인쇄하였음.
Thank you for purchasing the Clarion VRX746VD. ∗ This owner’s manual is for the VRX746VD. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. ∗ This manual includes the operating procedures of the CD changer, DVD changer, TV tuner, 5.1ch surround decoder. The CD changer, TV tuner, 5.
The Color LCD Display and the Information Panel on the main unit show the following displays, providing information about the mode and functions operated. Operation status indication ∗The frequency, play time, clock, etc. are displayed. : Preset channel indication Disc number indication ∗The disc numbers corresponding to the discs in the DVD or CD changer light. 1.
[FUNC] [FRONT OPEN] [SENSOR] [DISP] [ISR] [TILT] button Names of Buttons Note: • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). [VOL] button [s] button [Q] button • Use this button to increase/decrease the volume. • Press this button to enter the play pause mode in the DVD video mode and changer mode. Press the button again to resume playback.
[FUNC] [FRONT OPEN] [SENSOR] [DISP] [ISR] [TILT] button Names of Buttons Note: • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). [VOL] button [s] button [Q] button • Use this button to increase/decrease the volume. • Press this button to enter the play pause mode in the DVD video mode and changer mode. Press the button again to resume playback.
The Color LCD Display and the Information Panel on the main unit show the following displays, providing information about the mode and functions operated. Operation status indication ∗The frequency, play time, clock, etc. are displayed. : Preset channel indication Disc number indication ∗The disc numbers corresponding to the discs in the DVD or CD changer light. 1.
English Color LCD Display Mode name Owner’s manual •Radio mode : FM1 98.10MHz Pch 1 (band/frequency/preset No.) •DVD changer mode: D2 T02 C002 01:08:20 (disc No./title No./chapter No./ playback time) •DVD video mode : T01 C003 00:08:20 (title No./chapter No./playback time) •Video CD mode : T01 00:01:18 (track No./playback time) •MP-3 mode : F001 T001 00:04:07 (folderNo./track No./playback time) •CD mode : T 02 04 : 07 (track No./playback time) •CD changer mode : D2 T02 00 : 45 (disc No./track No.
English 6. OUTLINE OF BUTTON AND TOUCHKEY OPERATION Owner’s manual ∗2 ∗1 Engine ON position System check The CeNET format utilized on this unit is provided with a system check function. The operation panel’s system check menu is displayed under the following conditions: • When power is first turned on after initial installation. • When an external device is connected or disconnected. • When batteries are changed or otherwise when power is disconnected. • When reset button is pressed.
English (Radio mode screen) Owner’s manual (Next page) (LIST screen) ∗3 (KEY PAD screen) ∗5 (Title input screen) ∗4 1 0 7 9 0 ENT ∗6 ∗7 Notes: ∗1: The operation button is [OPEN] button in the description of operation per mode. ∗2: External equipment not connected with CeNET is not displayed. ∗3: The operation key is [SRCH] key in the description of operation per mode. ∗4: This shows a KEY PAD selection example in the radio mode when 107.90 MHz is selected.
English (Radio mode screen) Owner’s manual (FUNCTION menu) ∗8 ∗9 ∗11 (DVD mode screen) ∗10 (SUB menu) Notes: ∗8: The FUNCTION menu screen displays icons for components connected to the main unit. The icons serve as touch keys for selecting play modes. ∗9: Pressing the [FUNC] button changes to the following play modes. ∗10: Screen during DVD mode when automobile is moving. ∗11: When displaying images in DVD mode, touching the screen surface will cause the menu screen to be displayed.
English Owner’s manual (Next page) (ADJUST MODE menu) (DVD SETUP menu) (MONITOR menu) MONI ADJ PARENRTAL LEBEL VRX746VD 13
English Owner’s manual (ADJUST MODE menu) When a 5.
English Owner’s manual (AUDIO MODE menu) (AUDIO EXT.
English 7. REMOTE CONTROL Remote control unit Owner’s manual Signal transmitter Operating range: 30˚ in all directions [BAND] [MUTE] [FUNC] [VOLUME] [P.TIME] [0-9] [DISP] [DISC SEL] [ ],[ ] [SEARCH MODE] [MENU] [RTN] [DVD TITLE] [SET UP] [ENT] [ ],[ ] [ISR] [2-ZONE] [RPT] [SCN] [RDM] [AUDIO] [PBC] [SLOW] [ANGLE] [SUB TITLE] Inserting the Batteries 1.Turn the remote control unit over, then slide the rear cover in the direction of the arrow. 2.Insert the AA (SUM-3, IECR-6/1.
English Functions of Remote Control Unit Buttons ● DVD player mode [FUNC] button [BAND] button • Press and hold this button for 1 second or longer to turn on or off the power. Power on/ off, switches among radio, TV, etc. • Press to return to the first chapter in DVD video mode. • Press to return to the first track in CD/MP-3 mode or video CD mode with the PBC function turned off. [VOLUME] button • Increases and decreases volume. [MUTE] button [P.TIME] button • Turns mute on and off.
English Functions of Remote Control Unit Buttons [w], [z], [Å], [Î] buttons • Press to select menus and other items during DVD video/MP-3 playback. Owner’s manual [ENT] button ● CD changer mode [BAND] button • Press to switch discs. • Press to confirm numerics entered in the KEY PAD operation screen. [DISC SEL] button [a], [d] buttons [ • Press to select the next higher or lower chapter number in DVD video mode.
Removing the DCP 1. Press the [FUNC] button for 1 second or longer to turn off the power. CAUTION Be sure to close the HOLD FLAP for safety when removing the DCP. Attaching the DCP 1. Insert the right side of the DCP into the main unit. 2. Insert the left side of the DCP into the main unit. [FUNC] button DCP [FRONT OPEN] button 2. Deeply push in [FRONT OPEN] button to unlock the front panel. ∗ If the front panel does not open fully, gently open it with your hand. DCP 3.
English 9. CAUTIONS ON HANDLING Liquid crystal panel/Generalities Owner’s manual For a longer service life, be sure to read the following cautions. • Be sure to store the liquid crystal panel inside the main unit when parking the car outdoors for long period of time. The liquid crystal panel will operate properly in a temperature range of 0 to 60˚C. • Don’t allow any liquids on the set from drinks, umbrellas etc. Doing so may damage the internal circuitry.
DVD Video Features This unit provides the following functions in addition to the high image quality and sound quality of DVD video. Notes: • The functions described in the section, “Features”, for example, the recorded language, subtitles, angles, etc. differ with the DVD video disc. Refer to the instructions provided with the DVD video. • Some disc functions may operate differently than described in this manual.
English Discs TV color system This DVD player plays NTSC or PAL discs only and cannot be used for playback of SECAM discs. Playable discs This DVD video player can play the following discs. Owner’s manual Playable discs DVD video discs video CDs CD TEXT Audio CDs A CD Extra disc is a disc in which a total of two sessions have been recorded. The first session is Audio session and the sedond session Data sessioin.
Basic Operations Note: Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). Engine ON position Turning on and off the power Note: • Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery. 1. Press the [FUNC] button. 2. The illumination and display on the unit light up.
English Basic Operations Opening and turning the liquid crystal panel Owner’s manual WARNING • To prevent the battery from going dead, operate this unit with the engine running, if possible. • When the liquid crystal panel is operating, be careful not to get your hand or finger caught between the panel and main unit or the instrument panel of the car. • Do not move the liquid crystal panel by hand. Standing up the liquid crystal panel 1.
Adjusting the AUDIO 1. Press the [OPEN] button and the liquid crystal panel is housed automatically. Note: • When leaving this unit unused for a long period of time or leaving your car, be sure to house the liquid crystal panel into the main unit. Note: • When the separately-sold 5.1 ch Surround Decoder (DVH940) is used, the bass and treble tone adjustments cannot be made. To adjust the tone, refer to the section “5-1 ch Surround Decorder Operations”.
English Basic Operations Adjusting the MID Owner’s manual The MID gain, MID frequency (center frequency) and MID Q can be adjusted as follows. 1. Press the [ADJ] button, then touch the [AUDIO] key. 2. Touch the [MID] key. 3. When the bass type selection screen is displayed, touch the key for the desirable type to select it. 4. Touch the [w] or [z] key to adjust to desirable level. GAIN : –6 to 6 (The factory default setting is “0”) FREQ. : 700Hz/1kHz/2kHz (The factory default setting is “1k”) Q : 1.
Adjusting the dimmer level Use to adjust panel brightness when car lights are ON/OFF. ● The factory default: When the car light is off: Brightest setting (58 steps) When the car light is on: Medium brightness (29 steps) 1. When the panel is open, press the [ADJ] button to display the ADJUST MODE menu. 2. Touch the [MONITOR] key, and touch the [DIMMER LEVEL] key to adjust the dimmer level. Î] or [Å Å] key to adjust. 3. Touch the [Î 4. Touch the [RTN] key, [ESC] key, or press the [ADJ] button.
English Basic Operations 2-ZONE: 2 (rear monitor lock) Owner’s manual 1. Press the [ADJ] button to display the ADJUST MODE menu. 2. Touch the [MONITOR] key. 3. Touch the [REAR MONI LOCK] key and the [ON] key. 4. Touch the [RTN] key, [ESC] key, or press the [ADJ] button. 5. To cancel the monitor lock, press [ADJ] button, touch the [REAR MONI LOCK] key and the [OFF] key. 6. Touch the [RTN] key, [ESC] key. or press the [ADJ] button. The monitor lock is now canceled.
Switching CONNECT(connect) Make the following settings when an external device is connected to the Visual terminal. NAVI: when a navigation system is connected ∗ The time is displayed in 12-hour format. 4. Touch the [RTN] key, [ESC] key, or press the [ADJ] button. Setting the Auto Panel When you remove or attach the DCP, you can set the liquid crystal panel automatically housing or opening. ∗ The factory default setting is “ON”. 1. Press the [ADJ] button to select the ADJUST MODE menu. 2.
English Radio Operations FM reception Owner’s manual For enhanced FM performance the ® tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits. Listening to the radio 1. Press the [FUNC] button and select the Radio mode. The frequency is displayed. 2. Press the [BAND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order: FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1... 3.
●Using the LIST screen 1. Touch the [LIST] key. Preset scan 2. Touch the corresponding [DIRECT] key to recall the stored station. ∗ You can select the desired band to touch the [BAND] key. ∗ Touch and hold one of the [DIRECT] key for 2 seconds or longer to store the current station into preset memory. 3. Touch the [RTN] key or the [ESC] key to return to the previous mode. Manual memory ●Using the [DIRECT] button 1. Press the [BAND] button and select the desired band. (FM or AM) 2.
English DVD Video Player Operations Changing DVD System Settings Owner’s manual Notes: • If the SETUP operation is performed in the middle of DVD video play, the disc plays from the beginning. • Various settings of the SETUP menu cannot be made with the remote control unit. ●When watching through a conventional type of the rear view monitor (4:3) • N PS : The leftmost and rightmost areas of the screen are cut off. Selecting the DVD SETUP menu 1. Touch the screen to show the menu screen. 2.
2. Touch the key to select a desired language to set it. ∗ The factory default setting is “ENGLISH”. Setting up the audio language 1. Following the steps 1 to 3 in “Selecting the DVD SETUP menu”, touch the [AUDIO LANGUAGE] key. 2. Touch the key to select a desired language to set it. ∗ The factory default setting is “ENGLISH”. 3. Touch the [RTN] key ([ESC] key). Setting up the subtitle language 1. Following the steps 1 to 3 in “Selecting the DVD SETUP menu”, touch the [SUB TITLE LANG.] key. 2.
English DVD Video Player Operations Owner’s manual 5. Touch the [RTN] key ([ESC] key). The relationship between DVD video category codes and parental level are shown in the table below. Use this table when setting the parental level. LEVEL7 LEVEL6 LEVEL4 LEVEL3 LEVEL1 NC-17 (NO ONE 17 AND UNDER ADMITTED) R (RESTRICTED) PG-13 (PARENTS STRONGLY CAUTIONED) PG (PARENTAL GUIDANCE SUGGESTED) G (GENERAL AUDIENCES) • The contents that the parental level restricts varies with the country code.
Ejecting a disc ∗ If a disc is left in the ejected position for 15 seconds, the disc is automatically reloaded (Auto reload). In this case, however, the play mode will remain set to Radio. Note: • If you force a disc into before auto reloading, this can damage the disc. 4. Select the DVD menu contents use either the “Cross KEY PAD” or the “TEN KEY PAD” according to the disc contents menu. 5. Touch the [ENT] key and touch the [ESC] key.
English DVD Video Player Operations Owner’s manual Slow playback Fast forward and fast backward 1. Press the [s] button or touch the [s] key, then press and hold the [d] button or the [∂] key. While the button or key is being pressed, slow playback continues at the speed 1/3 times the normal playback. • Slow playback cannot be performed in the backward direction. In addition, audio cannot be reproduced during slow playback. 1. Press and hold the [a] or [d] button during playback.
Switching among languages On discs in which two or more audios or audio languages have been recorded, you can switch among the audio languages during playback. 1. Touch the screen to display the menu, then touch the [SUB] key. 2. Touch the [AUDIO] key during playback. Each time you touch the key, you can switch among audio languages. • Depending on the disc, up to 8 audios may be recorded. For details, see the mark of the disc ( 8 : Indicates that 8 audios have been recorded).
English DVD Video Player Operations Switching angles Owner’s manual On DVD discs in which video images have been recorded in two or more angles, you can switch among the angles during playback. This operation can be performed when the “Setting up the angle mark display” function (see P. 32) is set to “ON”. 1. Touch the screen. 2. Touch the [ ] (Angle mark) key during playback. Each time you touch the key, you can switch among angles. • Depending on the disc, up to 9 angles may be recorded.
Fast forward and fast backward 1. Press the [s] button then press and hold the [d] button. While the button is being pressed, slow playback continues at the speed 1/3 times the normal playback. • Slow playback cannot be performed in the backward direction. In addition, audio cannot be reproduced during slow playback. • The same operation can be performed by touching the screen to display the menu screen, then touching the [å] or [∂] key. 1. Press and hold the [a] or [d] button during playback.
English DVD Video Player Operations Owner’s manual Displaying the playback status Skipping a track (searching) 1. Touch the screen to display the menu, then touch the [SUB] key. 2. Touch the [P.TIME] key. Playback status is displayed on the screen. 3. Touch the screen to turn off the display. The display will turn off after 7 seconds. 1. Press the [a] or [d] button during playback. Tracks are skipped, as many as the times the button is pressed, and playback starts.
Selecting a track on the LIST screen Other various play functions 1. Touch the [SUB] key. Note: • The scan playback function can also be performed using the title list screen’s [T.SCN] key. To cancel play, touch the [T.SCN] key once again. Displaying CD titles This unit can display title data for CD-text CDs. 1. Touch the [DISC], [TRACK], or [ARTIST] key to cause the respective display to scroll once. Listening to an MP3 This unit is a ID3 Tag compatible model.
English DVD Video Player Operations Owner’s manual ●Logical format (File system) 1. When writing an MP3 file on a CD-R disc, please select “ISO9660 level 1 or level 2 (without including expansion format)” as the writing software format. Normal playback may not be possible if the disc is recorded on another format. 2.
3. Touch the [w] or [z] key to select the track and touch the track name. Touch the [RTN] key to return to the folder select (LIST) screen. 4. Touch the [ESC] key. Playback by selecting a folder and track (Direct select mode) This operation allows searching using the folder and track numbers recorded on the MP3 disc. 1. Touch the [SRCH] key. Each time you touch the [SFT] key, you can switch between “T000” for track number input and “F000” for folder number input. 2.
English Owner’s manual VISUAL Operations CD Changer Operations This function is available when a VTR, etc. is connected to the visual terminal. Note: • When an optional DVD (CD) changer is connected through the CeNET cable, this unit controls all DVD (CD) changer functions. This unit can control a total of 2 changers (CD and/or DVD). WARNING For your safety, the driver should not watch the VTR, etc. or operate the controls while driving. Please note that watching and operating the VTR, etc.
Selecting with a track number Owner’s manual When the panel is open: 1. Touch the [DISC], [TRACK], [ARTIST], or [USER] key to select the desired title. The selected titles except for the user title scroll once. English CD Changer Operations Selecting a CD When the panel is closed: Each of the [DIRECT] buttons corresponds to a disc loaded into the magazine. ●Selecting a disc from 1 to 6 Press the corresponding [DIRECT] button (1 to 6) to select the desired disc.
English CD Changer Operations TOP function Owner’s manual The TOP function plays from the first track (track No. 1) of the disc. ●When playing a disc 1 to 6 Press the [DIRECT] button (1 to 6) with the same number as the CD playing. ●When playing a disc 7 to 12 (only when a 12 disc CD changer is used.) Press the [DIRECT] button (1 to 6) with the same number as the CD playing for 1 second or longer.
Only basic operations of DVD changer can be performed from the unit. Use the remote control unit to perform the following functions. • SCAN, REPEAT, RANDOM function • V-CD PBC function ON/OFF • DVD SETUP function, AUDIO, SUBTITLE, ANGLE setting function For details on operations other than those described below, see DVD player Operation. For details on DVD changer precautions, refer to the supplied owner’s manual.
English TV Operations Seek tuning 1. Press the [BAND] button and select the desired TV band (TV1 or TV2). Owner’s manual ∗ The same operation can be performed by touching the screen to display the menu screen, then touching the [BAND] key. ∗ If “MANU” is lit in the display, press and hold the [BAND] button for 1 second or longer. “MANU” in the display goes off and seek tuning is now available. 2. Press the [d] or [a] button to automatically seek a station.
Auto store Auto store selects 6 TV stations automatically and stores each one into a preset memory. If there are not 6 stations with good reception, stations previously stored in memory remain and only the strong stations are stored into memory. 1. Press the [BAND] button and select the desired TV band. (TV1 or TV2) 2. Touch the screen to display the menu, then touch [LIST] key. 3. Touch and hold the [AS] key for 2 seconds or longer.
English Other Functions Owner’s manual Entering titles Title list play Titles up to 10 characters long can be stored in memory and displayed for Radio stations, CD, TV stations and CD changer. The numbers of titles that can be entered for each mode are as follows. You can display a list of titles, then select the CD track, disc or broadcast station to listen to from that list.
Triggered audio mute for cellular telepones This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car. ∗ This function is not compatible with all cellular telepones. Contact your local authorized Clarion dealer for information on proper installation and compatibility. Internal amplifier cancel function This function is used to disable the internal amplifier when an external amplifier is connected. ∗ The factory default setting is “OFF”. 1.
English 5.1 ch Surround Decoder Operations Owner’s manual 5.1 ch Surround Decoder control function ●Dolby PL II CONTROL This function is available when a 5.1 ch Surround Decoder (DVH940) is connected. When the 5.1 ch Surround Decoder (DVH940, sold separately) is CeNET connected, the 5.1 ch Surround Decoder Control unit (DVC940, sold separately) cannot be used. This section describes operation procedures only. For other details, refer to the owner’s manual supplied with the 5.
English 5.1 ch Surround Decoder Operations ●SPEAKER GAIN This function sets speaker output level. DSF mode ∗ This function is not available for speakers whose “SPEAKER SEL” setting is set to OFF. DSF effect ON/OFF 3-1. Touch the [SPEAKER GAIN] key to show the submenu. 3-2. Touch the [FRONT L], [CENTER], [FRONT R], [SURROUND R], [SURROUND L] or [SUB WOOFER] key to set respective item. 3-3. Touch the key to make adjustments in the range –10 dB to +10 dB in 1 dB step increments.
English 5.1 ch Surround Decoder Operations Setting and storing P.EQ Properties Owner’s manual 1. Press the [ADJ] button and touch the [AUDIO] key. 2. Touch the [P.EQ] key to show the P.EQ adjusting display. 3. Touch the key for the desirable type to select it. The P.EQ adjustment contents are as follows: ●SIGNAL ∗ The factory default setting is “P.NOISE”. This function selects “P. NOISE” or “MUSIC”. ●SPEAKER SELECT ∗ The factory default setting is “FRONT”.
Problem Cause English 12. IN CASE OF DIFFICULTY Measure Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. Nothing happens when buttons are pressed. The microprocessor has malfunctioned due to noise, etc. Turn off the power and remove the DCP. Press the reset button for about 2 seconds with a thin rod. Note: When the reset button is pressed, turn off the ACC power.
English Problem TV Owner’s manual 56 Cause Measure The image is not displayed. The parking brake is not pulled. Check that the parking brake is applied. The display is dark. The brightness control is too low. Adjust the brightness properly. The operating condition is not good. The temperature inside the vehicle may be 0˚C or less. Set to an appropriate temperature (25˚C or so) and check it again. The headlight of the vehicle is lit.
English 13. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. DVD PLAYER CD CHANGER Measure ERROR 2 A CD is caught inside the CD deck and is not ejected. This is a failure of CD deck’s mechanism and consult your store of purchase. ERROR 3 A CD cannot be played due to scratches, etc. Replace with a non-scratched, non-warped-disc.
English FM Tuner LCD Monitor Owner’s manual 14. SPECIFICATIONS Frequency Range: 87.0 MHz to 108.
English VRX746VD Installation and Wire connection manual 1. 2. 3. 4. 5. 6. 7. 8. 9. BEFORE STARTING ............................................................... PACKAGE CONTENTS ........................................................... GENERAL CAUTIONS ............................................................ CAUTIONS ON INSTALLATION .............................................. INSTALLING THE MAIN UNIT ................................................. REMOVING THE MAIN UNIT ....................
English 3. GENERAL CAUTIONS Installation and Wire connection manual 1. Do not open the case. There are no user serviceable parts inside. If you drop anything into the unit during installation, consult your dealer or an authorized CLARION service centre. 2. Use a soft, dry cloth to clean the case. Never use a rough cloth, thinner, benzine, or alcohol, etc. For tough dirt, apply a little cold or warm water to a soft cloth and wipe off the dirt gently. 4. CAUTIONS ON INSTALLATION 1.
English 5. INSTALLING THE MAIN UNIT ■ Universal Mount Notes: 1) Some car models require special mounting kits for proper installation. Consult your Clarion dealer for details. 2) Fasten the front stopper securely to prevent the main unit from coming loose.
English ■ Fixed Mount (TOYOTA, NISSAN and other ISO/DIN equipped vehicles) Installation and Wire connection manual This unit is designed for fixed installation in the dashboard. If the vehicle is equipped with a factory-installed radio, install the main unit with the parts and screws marked (∗). (Figure 8) If the vehicle is not equipped with a factoryinstalled radio, obtain an installation kit to install the main unit in the following procedure. 1. Remove the screws from both side of the main unit.
pull the main unit out by the hook plate. (Insert both the right and left edges of the hook plate.) (Figure 9) Note: Keep the hook plate. You cannot remove the main unit without disengaging the hook plate. Instrument panel Universal mounting bracket 2-Hook plate Main Unit Spring Outer escutcheon A B Figure 9 7. CAUTIONS ON WIRING 1. Be sure to turn the power off before wiring. 2. Be particularly careful where you route the wires. Keep them well away from the engine, and exhaust pipe, etc.
English 8.
English Installation and Wire connection manual Yellow +12V main power Black Ground Purple Purple/Black Grass-green Glay Rear right + Rear right Parking brake Front right + Glay/Black White White/Black Green Green/Black Blue/White Front right Front left + Front left Rear left + Rear left Amplifier turn-on lead Orange/White Illumination Red +12V accessory Brawn Phone mute (*1) Blue Auto antenna VRX746VD 65
English ■ Connecting the Accessories • Connection to the external amplifier The external amplifier can be connected unless the 5.1ch Surround Decoder is connected. For detailed information, refer to the instruction manual of the 5.1ch Surround Decoder. Installation and Wire connection manual • Connection to the CCD camera for vehicle The CCD camera for vehicle can be connected to CCD terminal on the tuner amp unit. For detailed information, refer to the instruction sheet or manual for the CCD camera.
English 9.
English ■ Sample System 2 VRX746VD RCA cable (sold separately) Installation and Wire connection manual VTR Visual input (Glay) Non fader output Front Speakers RCA video cable (included the TV tuner) RCA cable (sold separately) Rear Speakers 4-Channel Amplifier (APA4320) RCA cable (included the DVH940) CeNET cable (included the DVH940) RCA cable (sold separately) Center speaker built-in amplifier (SRK5) 5.
