User`s guide

Calypso
33
Program Time/Day: selects the time and the day.
The default
is 12:00 PM Monday.
With Time highlighted, press the Category
buttons to increase or decrease the hours.
AM and PM switch automatically.
Turn the Encoder knob to set the minutes.
Clockwise increases the minutes and
counterclockwise decreases them.
Press the Encoder knob
to accept the
selected time.
With Day highlighted, the unit displays the
days of the week (default Monday). Use
the Encoder knob
to select the day.
Channel: displays the list
of channels. Use the
Encoder knob
to select the channel to
associate with the selected time.
Program
Alert On/Off: turns the Program Alert
function
on and off. Your settings are:
Program Alert
On or Program Alert Off.
Auto Shutdown
You can configure the Plug and Play receiver to
automatically shut off after one hour. This
is
especially useful if the Plug and Play receiver is
running on battery power, such as in your car.
After running for
59 minutes of inactivity, the unit
displays: Cancel Auto Shutdown.
If you're near the
unit and wish it to continue, press the Encoder knob
to cancel shutdown.
Your settings are: Enabled, Disabled (default).
Rotate the Encoder knob
to highlight the setting and
press the knob to select the highlighted setting.
Sleep mode
This option lets you configure the Plug and Play
receiver
to shut down after a number of minutes.
Sleep Off:
is the factory default.
15,30,45 and 60 minute: intervals are your
settings.