User`s guide

14
User's Guide
Configuring Jump for traffic reports
1. Turn the Encoder knob to highlight "Traffic;' then
press the knob to make your selection.
Choose JUMP Setting
Tt-.af·f" i c : N .... ·C
JUMPSet.
Traffic option
2. Turn the Encoder knob to highlight your city,
then press the knob to make your selection.
Traf"f"ic
BOS
RTL
CHI
City option
To cancel your selection, press MENU.
If the channel list has not been
downloaded from the satellite data
channel, the message, "Updating
City List" appears. Please wait
10
minutes and select your city again.
When you press JUMP, the unit immediately
searches for your city's traffic report when you press
JUMP.
The band indicator changes to the Jump icon to
indicate that search
is active. Pressing JUMP while
the receiver is searching, cancels the search and
returns you to your previous channel.
After tuning to the local traffic channel, you may
have to wait up to four minutes to hear your specific
report. The receiver displays
an alert when the
report for your selected city
is broadcast.