User Guide

SIRHM

2. Gently slide the Plug and Play receiver into the

cradle.

3. Press on the top of the receiver to engage the

connectors.

The clip automatically engages.

Push the Release button and slide the Plug and

Play receiver upwards.

Place the antenna on a relatively flat surface.

Determine the best position

1. Plug the antenna into the connector on the side

of the cradle.

6. Removing the receiver

7. Mount the antenna

2. Place the antenna at the preferred location

inside or outside your home.

3. Press the power button to turn the Plug and

Play receiver’s power on.

4. Check the signal strength indicator in the

bottom left corner of the display.

If necessary, move the antenna to different

positions until the signal comes loud and clear.

5. If mounting the antenna outside, fix it in the best

position. Indoors, the antenna can be free-

standing.

6. Turn the Plug and Play receiver off.

Clarion_SIRIUS_PnP_Shuttle_Home_Installation_Guide.book Page 7 Monday, February 16, 2004 5:01 PM