User's Manual

44
7. TROUBLESHOOTING
If you have a problem with this system, check the following items to resolve it. Consult your Mitsubishi Motors dealer for additional information.
General
Problem Cause Measure
Power does not turn on.
(No sound is produced.)
Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult
your store of purchase.
Incorrect wiring. Consult the nearest Mitsubishi Motors dealer.
The display is dark. The Dimmer control is too low. Adjust the Dimmer properly.
The operating condition is not good. The temperature inside the vehicle may be 0°C or lower. Set to an appropriate
temperature (25°C or so) and check it again.
The headlight of the vehicle is lit. The display is made dark at night to prevent the glare (when the headlight is
the vehicle is lit in the daytime, the display gets dark).
There are red, green and
blue points in the display.
This is not a failure, but a phenomenon peculiar to a liquid crystal display
(The liquid crystal display is produced according to technology with very high
precision. Note that, though there are effective pixels of 99.99% or more, pixel
missing or normally lit pixels account for 0.01%).