User's Manual

34
Folder representation in the folder
list
The limitations on folder representation are
the same as those in MP3/WMA/AAC (CD)
mode. See “Folder representation in the
Folder list” (page 25).
Selecting the USB mode
Connect your USB memory to the USB
connector.
The system changes to USB mode, and
starts playback after a short time.
WARNING
Some tracks may be recorded at a
higher volume level than desired.
Increase the volume gradually from
the minimal setting after playback has
started.
•
When a USB memory is already
connected
Press the [AV] button to display the Source
menu screen.
Touch the [USB/iPod] key to select USB
mode.
The system changes to USB mode, and
starts playback from the previous position.
You can also select USB mode by using
the steering remote control. É “Steering
Remote Control Operations” (page 19)
q
1.
l
1.
2.
•
USB mode screen
Information pane Folder name
File type Folder list pane
USB mode operations
Operations in USB mode are the same as
those in the MP3/WMA/AAC (CD) mode. See
“MP3/WMA/AAC operations” (page 24).
iPod
®
Operations
This unit can be used to control a connected
Apple iPod.
To connect your iPod to this unit, use a USB
cable (sold separately).
Note:
iPhones can also be connected to this system
and “iPod” appearing in this manual should be
referred to as “iPod/iPhone”.
This unit will not operate or may operate
improperly with unsupported versions.
For detailed information on the playable iPod
models, consult your Mitsubishi Motors dealer.
You cannot enjoy video movies on this unit.
When a video track is played back, only the
audio data will be output.
Some functions may not operate properly
depending to the software version of the iPod.
Use an iPod updated with the latest software
downloaded from Apple’s website.
When you connect an iPod which has large
q
q
•
•
•
•
•
•
number of tracks, it may take a long time to
establish a connection with the iPod or to
control the iPod features.
Before connecting an iPod, be sure to store
audio tracks using iTunes®. If an iPod has no
audio track, an error occurs when the iPod is
connected.
If no sound is output from an iPod, disconnect it
from the unit once, then connect it again.
Notes on using an Apple
iPod
After the iPod has been connected to this
unit, a logo screen sent from this unit is
displayed on the screen of the iPod.
This unit can display Podcast titles*
1
, Artist
names, Album titles, Song titles, Genre
names, Playlist titles, and Composer names
registered on an iPod. When no data is
present, “----------” will be displayed.
*
1
Whether these functions are available or
not depends on the iPod version.
The iPod is used with the equalizer function
turned off.
Do not connect an iPod to this unit with a
headset connected to the iPod.
Selecting iPod mode
Connect your iPod to the USB connector.
The system changes to iPod mode, and
the iPod mode screen is displayed.
•
•
q
•
•
•
•
q
1.