User's Manual

22
PTY (Program Type) function
Note:
This function is only available when using Radio
Data System functions.
This function enables you to listen to a
broadcast of the specified programme type
when the broadcast starts, even if the system
operates in a mode other than Tuner mode.
Some countries do not yet have PTY
broadcasts.
In TA standby mode, a TA broadcast has
priority over a PTY broadcast.
The default setting is OFF.
Setting the PTY function
Touch the [Settings] key to display the
Settings screen.
Touch the [PTY (Program Type)] key.
Touch the [PTY Select] key to display the
PTY Select screen.
Touch your desired PTY item key to select
the programme type.
The 29 types of PTY listed below can be
selected.
PTY item
News
Current Affairs
Information
Sport
Education
Drama
Culture
Science
q
•
1.
2.
3.
4.
PTY item
Varied Speech
Pop Music
Rock Music
Easy Listening
Light Classics
Serious Classics
Other Music
Weather
Finance
Children’s Progs
Social Affairs
Religion
Phone In
Travel & Touring
Leisure & Hobby
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary
The programme type is set.
Canceling a PTY interrupt broadcast
Touch the [Cancel] key while receiving the
PTY interrupt broadcast.
The PTY interrupt is cancelled, and the
system returns to PTY standby mode.
Emergency broadcast
If an emergency broadcast is received, all
function mode operations are stopped, “Alarm”
appears on the screen and the emergency
broadcast can be heard.
Canceling an emergency broadcast
Touch the [Cancel] key while receiving the
emergency broadcast.
The emergency broadcast reception is
cancelled.
Volume setting for TA,
emergency broadcast, and
PTY
Note:
This function is only available when using Radio
Data System functions.
The volume of interrupts for the TA function,
emergency broadcasts, and the PTY function
can be set.
Touch the [Settings] key to display the
Settings screen.
Touch the [–] or [+] key on the [TA Volume]
pane to set the volume to the desired level.
Level: 0 to 31
You can also adjust the volume of a
TA interrupt by pressing the [–] and [+]
(Volume) buttons during the TA interrupt.
1.
1.
q
•
1.
2.
•
•