User's Manual

21
Manual memory
Touch the [Band] key to select the desired
band.
Select the desired station with the manual
tuning or preset tuning.
Touch and hold one of the Preset key for
more than 1.5 seconds to store the current
station into the preset memory.
Displaying the Station List
You can display a list of stations that are
currently receivable.
Touch the [FM/AM] key to select the
desired band.
Touch the [Station] key to display the
Station List screen.
You can tune in a station by touching the
desired Station key.
You can update the station list by
touching the [Update Radio Station
List] key. The currently receivable
stations are listed in alphabetical order.
The system also updates the list of FM
stations automatically.
Note:
The system does not update the list of AM
stations automatically. Touch the [Update Radio
Station List] key to update the station list.
Displaying radio text
Note:
This function is only available when using Radio
Data System functions.
When the station receiving broadcasts text
data, you can display the data on the screen.
Touch the [Info] key on the Tuner mode
screen.
The received radio text is displayed on the
screen.
1.
2.
3.
1.
2.
•
•
•
1.
TA (Traffic Announcement)
function
Note:
This function is only available when using Radio
Data System functions.
When a traffic announcement broadcast
starts during TA standby mode, the traffic
announcement broadcast is received as top
priority regardless of the function mode, so
you can listen to it.
Setting TA standby mode
Touch the [TA] key.
The key becomes lighted and “TA” is
displayed in the information pane.
Canceling a TA broadcast
Touch the [Cancel] key while receiving a TA
broadcast. Broadcast reception is canceled,
and the system goes into TA standby mode.
Canceling TA standby mode
When the [TA] key is highlighted, touch the
[TA] key.
The key lighting turns off and [TA]
disappears from the information pane.
AF (Alternate Frequency)
function
Note:
This function is only available when using Radio
Data System functions.
The AF function switches to different
frequencies of the same broadcast in order to
maintain optimum reception.
Setting the AF function
Touch the [Settings] key to display the
Settings screen.
q
•
1.
1.
q
•
1.
Touch the [AF (Alternative Frequency)]
key.
The AF function is turned on and [AF] is
displayed in the information pane.
If the reception of the current broadcast
deteriorates considerably, this unit searches
for the same broadcast on another frequency.
REG (Regional Frequency)
function
Note:
This function is only available when using Radio
Data System functions.
When set to ON and the AF function activates,
the REG function allows the unit to receive a
station with the same programme identification
code as the one that was previously received.
When set to OFF and the AF function
activates, the system receives stations with
other programme identification codes, such as
regional variants of a programme.
- The default setting is ON.
Setting the REG function
Touch the [Settings] key to display the
Settings screen.
Touch the [REG (Regional)] key.
The REG function is turned on and [REG]
is displayed in the information pane.
Note:
This function can only be set when the AF
function is set to ON.
2.
q
•
1.
2.
•