User's Manual

18
Connecting a USB media
device
CAUTION
For your safety, the driver should not
connect or disconnect a USB media
device.
Do not start the vehicle’s engine while
the USB media device is connected,
since it may result in loss or damage to
data on the USB media device. Connect
the USB media device to this unit after
starting the engine.
Turn on the power of your USB media
device, if required.
Confirm the orientation of the connectors,
and connect the USB media device to the
USB connector of this unit.
It may take a long time to recognize the
connected device.
After connecting a USB device
The system switches to the relevant source
media mode depending on the USB device
connected, and playback starts.
When an iPod is connected:
The system switches to iPod mode. See “iPod
Operations” (page 34).
When a USB memory is connected:
The system switches to USB Memory mode.
See “USB Memory Operations” (page 33).
Note:
Never insert unrelated objects into the USB
connector.
Always insert the USB media device fully into
the connector. Incomplete connections may
cause the device not to be recognized.
q
•
•
1.
2.
•
•
•
Disconnecting a USB media
device
Confirm that data is not being transferred
to or from the USB media device.
For how to confirm this, refer to the
operation manual of your USB media
device.
Remove the USB media device from the
USB connector.
CAUTION
Be sure to disconnect the USB media
device while the vehicle’s engine is
running. Otherwise, loss of or damage to
data on the USB media device may occur.
Do not stop the engine when the USB
media device is connected.
Note:
When turning on the ACC power with no USB
media device connected, “No USB memory.”
may be displayed on the screen if USB mode is
selected.
Selecting a Media Source
You can change the media source to be
played from the Source menu screen.
Press the [AV] button to display the Source
screen.
q
1.
2.
•
1.
Touch the corresponding key for the
desired Source.
The system switches to the corresponding
source mode.
When [Audio OFF] is not enabled,
pressing the [AV] button from the Source
menu screen displays the current mode
screen.
Note:
You can also change the source mode by using
the steering remote controller. For details, see
“Steering Remote Control Operations” (page
19)
Available media sources
Key name Corresponding
source mode
Refer to
FM/AM Tuner mode P. 20
DVD/CD*
1
CDDA mode P. 23
MP3/WMA/AAC
mode
P. 24
DVD Video mode P. 26
SD Memory
CARD
SD memory card
mode
P. 32
USB/iPod*
2
USB Memory
mode
P. 33
iPod mode P. 34
Bluetooth Bluetooth Audio
mode
P. 36
*1 The source mode differs depending on the
data format of the disc set in the CD player.
When no disc is set in the CD player, “No
disc.” is displayed.
2.
•