User's Manual

16
Storage
Do not expose discs to direct sunlight or any
heat source.
Do not expose discs to excess humidity or
dust.
Do not expose discs to direct heat from
heaters.
Cleaning
To remove finger marks and dust, use a soft
cloth and wipe in a straight line from the
centre of the disc to the circumference.
Do not use any solvents, such as
commercially available cleaners, anti-static
spray, or thinner to clean discs.
After using special disc cleaner, let the disc
completely dry off before playing it.
On Discs
Exercise sufficient precaution when loading
a disc.
Never turn off the power and remove the
unit from the car with a disc loaded.
Do not use lens cleaning discs. These may
damage the lens of this unit.
When there seems to be something wrong
with reading discs, please consult the
nearest authorized Mitsubishi Motors dealer.
Setting a disc
Press the [OPEN/nTILT] button to display
the OPEN/TILT screen.
Touch the [Panel Open/Close] key.
The operation panel opens.
Insert a disc into the centre of the insertion
slot with the label side facing up.
The disc is automatically drawn into the
disc slot.
•
•
•
•
•
•
•
•
•
•
q
1.
2.
3.
After setting a disc
The system automatically switches to the
relevant source mode according to the disc,
and starts playing back the disc.
When a DVD video disc is set:
The system is switched to the DVD Video
mode. See “DVD video Operations”
(page 26).
When an Audio CD is set:
The system is switched to the Audio CD
mode. See “Audio CD Operations” (page 23).
When a CD/DVD with MP3/WMA/AAC files
is set:
The system is switched to the MP3/WMA/AAC
mode.
See “MP3/WMA/AAC Operations” (page 24).
Note:
Never insert foreign objects into the disc slot.
If the disc cannot be inserted, another disc
might already be in the disc slot. Eject a disc in
the disc slot before inserting a new disc.
8 cm (single play) discs cannot be used.
CAUTION
For your safety, the driver should not
insert or eject a disc while driving.
Ejecting a disc
Press the [OPEN/nTILT] button to display
the OPEN/TILT screen.
Touch the [Disc Eject] key to eject the disc.
The operation panel opens and the disc is
ejected.
If a disc is left in the ejected position for
20 seconds, the disc is automatically
reloaded (Auto reload).
Remove the disc carefully.
•
•
•
q
1.
2.
•
3.
Touch the [Panel Open/Close] key to close
the operation panel.
Note:
If you force a disc into the insertion slot before
auto reloading, this can damage the disc.
Inserting/Removing an SD
Memory Card
Playable discs
This unit has one USB (Universal Serial Bus)
connector which is compatible with USB 1.1
and USB 2.0.
Playable SD memory cards
This system can control the following SD
memory cards.
Cards with a FAT16 or FAT32 file system
Cards with a size of up to 32GB
This system does not operate or may
operate improperly with some SD memory
cards.
About the SD memory card
This system can play audio files (MP3/WMA/
AAC) stored in an SD memory card. You can
use your SD memory card as an audio device
by simply copying desired audio files into it.
Files protected with any DRM cannot be
played.
For the other limitations, see “SD Memory
Card Operations” (page 32).
4.
•
q
q
•
•
•
•
•