Installation guide

To exit the learn routine:

The learn routine will be exited if any of the following occurs:

1. Close the open door.

2. Turn the ignition on.

3. There is no activity for longer than 15 seconds.

4. The Valet/Program switch is pressed too many times.

feature menus

The default settings are indicated in bold type. Features that have additional settings that can be programmed

using the Prosecurity programmer are indicated with an asterisk (*).

FEATURE NUMBER ONE-CHIRP SETTING (DEFAULT) TWO-CHIRP SETTING

1-1 Active arming Passive arming

1-2 Arm/disarm chirps on Arm/disarm chirps off

1-3 Ignition lock ON Ignition lock OFF

1-4 Ignition unlock ON Ignition unlock OFF

1-5 Active locking only Passive locking

1-6 Panic with ignition on No panic with ignition on

1-7 0.8 second door lock pulses (1) 3.5 (2), 0.4 (3) seconds

1-8 Forced passive arming on Forced passive arming off

1-9 Automatic engine disable on Automatic engine disable off

1-10 Armed When Driving (AWD) on AWD off

1-11 Code Hopping on Code Hopping off

1-12 Horn Output Pulsed Constant

1-13 Horn function Full Alarm Only (1) Siren function - chirp length

20mS (2)/30mS (3)/40mS (4)/50mS (5)

1-14 Comfort Closure ON Comfort Closure OFF

NOTE: The numbers in parentheses indicate the number of times the siren will chirp and the

LED will flash.

menu #1 - basic features