User Guide

InfoGation Corp. PhoneBase 23
Calling a Number Using One-Touch Dialing
Using the keypad, you can select and dial numbers stored in
preset locations 1 through 9 using one-touch dialing.
! To dial a number using one-touch dialing—
1. Press and hold the key that corresponds to the preset
number you want to dial.
2. Release the key when the system starts the dialing
sequence.
Ending a Call
! You have three options to end a call—
• Press ENTER
• Press the END key on the telephone, or
• Press the Auto PC’s “Push-To-Talk” button, and then
say “End”
Note: If the Phone Ending Confirmation option is set to “ON”,
the system will ask if you truly want to end the call. Using the
Selector Control, choose YES or NO and then press ENTER. To
learn how to turn this feature on or off, see Chapter 3—Setting
System Preferences on page 25.
Answering Calls With Auto Answer On
When you place your cellular phone in the Phone Cradle
and turn it on, PhoneBase will automatically answer all
incoming calls and route the audio over your car’s sound
system. To speak with your caller, speak clearly and directly
into the ORA microphone. (To learn how to enable or
disable the Auto Answer feature, see Chapter 3—Setting
System Preferences on page 25.)